Part Number: TPS25221 Hi Team,
May I get your help for below questions? Thanks.
The power supply is 5V/2.2A, and loading is 5V/2.7A, using TPS25221 for 5V/1.8A current limit protection.
While loading is the 2.7A as TPS25221 current limit at 1…
Part Number: TPS25221 Tool/software: Hello,
I have a question for TPS25221.
It has reverse current blocking function when disabled. Does it work even when VIN=0V?
I found a similar post regarding this topic, but it discussed whether it is damaged…
Part Number: TPS25221 Tool/software: Hello,
The TPS25221 has a reverse current blocking function, but is there any leakage from the body diode of the built-in FET?
Will the reverse current be blocked if the enable pin is set below the threshold of…
Part Number: TPS25221 Other Parts Discussed in Thread: TPS2552D , TPS2552-1 , TPS2552 Tool/software: Hi Team,
Customer is seek a TPS25221 p2p part but with the enable is active low, could you help check if this is available?
Regards,
Will
Part Number: TPS25221 Tool/software: HI sir
if the ocp is setup to1.6A
i hope the range between IOS(min)=1500mA / IOS(max)=1700mA
according to the Table 3, the worse case is the 1438mA~ 1699mA in 1% resistance
so, if I use the 0.1% resistance…
Part Number: TPS25221 Tool/software: Hi team,
Is it possible to limit the inrush current to below 500mA with this device?
The USB Power-Distribution Requirements in section 10.2.3.1.1 state "Limit inrush current (<44 Ω and 10 µF)." Does this mean…
Part Number: TPS25221 Tool/software: Hi Team,
I have two questions about the placement of the TPS25221 bypass capacitor: Cout (>120uΩ).
1. I am thinking of wiring the OUT pin of the TPS25221 through an LC filter, then connecting Cout to the USB connector…
Part Number: TPS25221 Tool/software: Hi Team,
I'm using the part TPS25221DRV in my design.
While checking the datasheet pin description, it is mentioned "Enable input, logic high/low turns on power switch"
Query is whether Enable should be driven…
