Part Number: TPS25221
Hi all,
I have a question regarding the TPS25221DRVT. The datasheet states that the thermal pad is internally connected to GND. I tested this on two samples, but this was not the case.
Is this an error in the datasheet or are there…
Part Number: TPS25221 Hi Team
I want to use TPS25221 in a 5 pin socket, can I connect I limit Pin to GND when not use?
Thank you
Best regards
Joe
AUG 9
Part Number: TPS25221 Hi Sir:
Now we are using the TPS25221 to build into our schematic and follow customer requests to keep the limit current at 500mA.
Unfortunately, the PCB's dimension is insufficient for the electrolytic capacitor of 120uF.
If…
Part Number: TPS25221 Hi Team,
I am curious about the MOSFET architecture in TPS25221. Ingeneral N-MOSFET the body is connected to source so a body diodes is present, but refer to TPS25221 the body is connected to GND directly:
1. When Vout is larger than…
Part Number: TPS25221 Hi,
Good Day.
Can you please tell what the leakage current in the OUT Pin of the device TPS25221 is when the chip is not powered at all (Vin =0V)? But the voltage on the OUT Pin is still buffered to 5V with a capacitor.
Please…
Part Number: TPS25221 Hello,
I'm interested in the behavior of the device at supply voltages <2.5V (i.e. below the minimum operating voltage): In my application I can guarantee that the switch is only enabled at IN voltages ≥2.5V, but there are…
Part Number: TPS25221 Hi Expert,
We are proposing TI solution to build the 2nd source with AP22653W6-7.
We found the TPS25221 is P2P but it not had OUTPUT DISCHARGE.
Can you advice whether we has OUTPUT DISCHARGE and P2P with TPS25221
Thanks
Eric Lai
Part Number: TPS25221 Hi Team,
could you please provide CB certificate of TPS25221DBVR?
here is my email address: pattychuang@ti.com
Thanks!
Patty Chuang