Part Number: TPS2561 Hi Experts, Good day. Please help provide the Input voltage rise time of TPS2561. In the datasheet, the only available info is the output rise time. Regards, Josel
Part Number: TPS2561 Hi Sir,
I tested TPS2561 with different current limit setting and got abnormal behavior when over current occur.
For 1.4A current limit, TPS2561 is auto retry when OC occur; but for 1A current limit setting, TPS2561 isn't auto retry…
Part Number: TPS2561 I design set-top box have USB port
TPS2561 is designed for USB, and for IEC62386-1 certification.( US-37138-UL)
But TPS2561 doesn't have Input Over Voltage LockOut(or Clamping).
How certificate IEC62386-1 with TPS2561?
Is TPS2561…
Part Number: TPS2561 Hi TI Expert,
For below auto-retry implementation, when OC happens, the fault is pulled low and 0.22uF cap will be discharged through FAULT pins.
Is there any pull-down resistance to limit the discharge current?
Thanks
Part Number: TPS2561 Other Parts Discussed in Thread: TPS2560 Hello Expert,
I have a question.
Is there internal Pull-up or Pull-down resistor in EN pin which is TPS2561, TPS2560?
If yes, what's the resistor value?
Best regards,
Michael
Part Number: TPS2561A Other Parts Discussed in Thread: TPS2560 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/350238/what-is-the-difference-between-the-tps2561-and-tps2561a
The explanation of Milo is still not…
Part Number: TPS2561 Hello,
I have used the TI TPS2561 current limited power switch on two different designs.
It has worked well for me using the switch on a four port USB Hub with a Panasonic NN31001A-BB DC/DC converter switching at 800kHZ .
However…
Part Number: TPS2561 Dear experts
My customer have some confuse about the device behavior with the condition of Full-Load to Short-Circuit Transient Response.
From the picture, when a short condition happened, there have a current spike, and then seemed…
Part Number: TPS2561 We are currently using a TPS2561DR in our design; however due to this part being out of stock with a long lead time, we are looking for a direct part swap. This part is being used to limit power current of USB and SATA power supplies…