Part Number: TPS25730 Hello;
There are serveral posts on this forum about this but it's still not entirely clear to me.
We are designing an apllication with a USB-C Sink with a TPS25730 PD controller.
It is intended to be used with a USB-C PD type…
Part Number: TPS25730 Other Parts Discussed in Thread: TPS25750 , TPS25751 The TPS25730 Technical Reference Manual claims (or at least strongly suggests) that the chip only has registers 0x31, 0x33, 0x34, and 0x35, but when I talk to its register 0x03…
Part Number: TPS25730 Hello,
I am curious about the behavior of the PLUG_EVENT (pin 37 on TPS25730D) signal pin. Table 5-1 indicates that it is HIGH/LOW indication signal where HIGH means a plug is detected and LOW means no plug is detected.
My…
Part Number: TPS25730 Other Parts Discussed in Thread: CSD87501L Hi,
I'm having a very similar problem to the related question. The TPS25730S is failing to bring GATE_VSYS to a high enough voltage to allow VBUS through.
In my design VBUS is succesfully…
Part Number: TPS25730 Can any insight into the controller's local policy be provided? For example, if there are multiple valid source PDO's advertised, how does the controller determine which to request?
From my testing, it seems to prefer fixed supply…
Part Number: TPS25730 Other Parts Discussed in Thread: TPS25751 , TPS65987 Is it possible to use TPS25730 in combination with TUSB1046 to control the power delivery on usb c port with power delivery (as a sink) and usb 3 and DP alt mode capabilities.…
Part Number: TPS25730 Tool/software: Hi team,
May I know TPS25730 CAP_MIS output status when PD supply and capability is well matched? This pin will output high or low?
And if the PD supply capability is mismatch, this pin output toggle. Does it means…
Part Number: TPS25730 Other Parts Discussed in Thread: TPS25751
Hi Team,
Posting on behalf of our customer.
We are currently evaluating to use the TPS25730D in a design.
I would like to be able to use the ADC inputs for other analog measurements…
Part Number: TPS25730 Hi Team,
Please assist with schematic review.
Can the LDO_3V3 be connected to VIN_3V3 to supply power to VIN_3V3?
Or an additional 3V3 power supply is required to VIN_3V3.
Part Number: TPS25730 Tool/software: Hi,
Since there is already an FET on the power path controller, I would like to operate the TPS25730S without an FET.
Is this possible?
How must VSYS be connected, directly to VBUS?
What else needs to be…
