Part Number: TPS25925 Other Parts Discussed in Thread: TPS2595 Tool/software: Hello TI team,
The customer is using the TPS259525DSGR. Please help review the schematic
Thanks
Part Number: TPS25925 Tool/software: Hi TI team
I would like to request your support to clarify the below concern.
We detected some differences in the MSL level, in our system we have set this item as a MSL 2, the label in the real has MSL 2,…
Part Number: TPS25925 Our requirement is as below.
Input: 5V (for USB)
output: 5V (for USB)
Maximum power out: 20W
When the output ask more than 20W, the IC stable output 5V/4A, not shutdown.
Is TPS25925 ideal for this application?
Part Number: TPS25925 Hi team,
When Iload condition is ILIM<Iload<ISC, ILOAD will decrease to ILIM as my understands. And it is described in Figure 38.
How much time is required to decrease to ILIM? A customer have seen Iload>ILIM condition for 1…
Part Number: TPS25925 Hi TI Teams,
Our customer feedback that there is a voltage drop and back-channel on the output terminal USB_VBUS of TPS259251 with a time interval of about 600us, the schematic is as follows:
The waveform of voltage dorp…
Part Number: TPS25925 Hi,
According to datasheet, current limit is 2A~5A.
Base on equation, if I use Rlim=24.9kohm get 1.45A current limit.
My question is can I set current limit 1.45A of the e-fuse?
Part Number: TPS25925 Dear TI team:
We test TPS259251, but have a doubt need your help.
Input voltage:5V output: 2A , When we connected TPS259251 Out PIN to GND to test short protect function, IC input current up to about 500mA , and the temperature…
Part Number: TPS25925 Hi Expert,
I check the datasheet of TPS259250 for TVS & Schottky diode, showed that's is optional, seems that 's nice to have.
but would like to know what's the condition is must to use them?
when we are in design stage, how…
