Part Number: TPS25944A Tool/software: Hi Experts,
This device supports diode mode(DMODE). DMODE pin is pulled down internally so usually this device acts as eFuse. When DMODE is pulled high, this device moves to diode mode (non ideal diode mode). In…
Part Number: TPS25944A Other Parts Discussed in Thread: TPS2663 Hi. Experts.
I need a Power Mux circuit for a new project I'm working on.
The primary power source is a 48V constant power supply, and the secondary power source is a 3.7V battery.
…
Part Number: TPS25944A Tool/software: We are seeing reducing voltages in our functional test fixtures for TPS25944A under load at 4.5A.
As part of our investigation, I would like tohave on-hand a more recent data set for the FET channel resistance,…
Part Number: TPS25944A Hi Experts,
There are formulas to calculate R(ILIM) in (4) on page 23 and (10) on page 30 as below.
Each formulas use as ‘89’ for denominator. I think it should be ’87’ because V(ILIM) is defined as 0.87V.
Could you…
Part Number: TPS25944A Other Parts Discussed in Thread: TPS25942A , Hi Experts,
There is a figure at hot short condition on page 36. This is for TPS25942A. Is it the same waveform with TPS25944A?
Regards,
Uchikoshi
Part Number: TPS25944A Hi Experts,
My customer wants to split the power rail for IN(5V) and EN/UVLO(3.3V). Is it possible to apply the voltage to EN/UVLO pin while IN is not supplied?
Regards,
Uchikoshi
Part Number: TPS25944A Hello,
I am looking for an E-fuse that is functionally similar to the TPS25944A. Any recommendation? We need at least 1ku available.
Best,
Adam
Part Number: TPS25944A Dear Team
I mistakenly connected the IMON pin to GND. However, there is no sign of overcurrent. Since IMON is internally connected to a current source, for example, if the current limit set by ILIM is 0.6A, then wouldn't the output…
