Part Number: TPS2640 Other Parts Discussed in Thread: TPS1H200A-Q1 , TPS2595 Hello,
My customer is looking for a product that has the ability to limit inrush current.
The inrush current measured on the primary side (power connector) of the 12.5V …
Part Number: TPS2640 I am using TPS26400RHFR as a reverse polarity protection. I noticed that the reverse voltage would pass through to the output. When the input -24V, the output voltage -0.4V.
Input and output voltages are shown below.
The schematic…
Part Number: TPS2640 Hi all,
I would like to ask some questions about TPS2640.
1) What is Icharge? Where is the current flowing in the functional block diagram on datasheet?
2) What is Tstart?
Best Regards,
Rysuke
Part Number: TPS2640
I am working on one project. In that, I am using TPS26400RHFR as protection ic.
I refer same circuitry for my project with TPS2640EVM Schematic
but my circuit is not working.
input = 24VDC
output get zero voltage…
Part Number: TPS2640
Hello team,
I am confused if Cout is an output capacitor OR load capacitance.
On EVM, there is 47uF capacitor connected to the OUT pin of TPS2640.
However, on the Design Calculator Tool, Cout is described as load capacitance…
Part Number: TPS2640 In order to comply to a standard, I need to keep certain parts of the circuit separate from others. For the TPS2640, I need to keep all the signal pins at least 0.20mm away from the central ground pad as shown here with the red and…
Part Number: TPS2640 Other Parts Discussed in Thread: TVS2701 Hi team,
1)
can you tell what is the purpose and how to select schottky diode on output, page 38 figure 11-1 in Datasheet?
2) In what scenario can we use bidirectional TVS2701 instead…
Part Number: TPS2640 Other Parts Discussed in Thread: TPS2663 Hi team,
The customer's request is shown below. I want to know whether we can use TVS and efuse to meet the customer need. So could you please help me to find out a efuse or TVS+efuse?
…
Part Number: TPS2640 Hi Team,
we don't use RPP on TPS2640, is it ok to connect RTN to GND ?
also by doing this ( connecting RTN to GND) is any other functionality besides RPP disabled?
Br,
d.
