Part Number: TPS2663 Tool/software: I'm trying to control the output of two TPS2663s in one system and I'm checking their operation.
1. Basic configuration
If you measure the input voltage of each load, the characteristics are roughly like that…
Part Number: TPS2663 Tool/software: Good morning,
is it possible to have the approval to download Pspice for Ti to simulate the TPS2663x? I need to test an external 'power limiter' circuit developed by me. I need a precise control of the over-voltage…
Part Number: TPS2663 Tool/software: Pins are incorrect, I'm trying to sim TPS26630 specifically. The pin for PLIM should be the same as OVP (it's an either/or situation, depending upon part #).
What do I do with PLIM if it's not supposed to exist? …
Part Number: TPS2663
Tool/software:
Hi,
we have encountered multiple incidents, where the e-fuse IC failed, resulting in a short circuit between VIN (Pin1&2) and VOUT (Pin17&18), when the power supply was turned on. We have tested it with various…
Part Number: TPS2663 Other Parts Discussed in Thread: TPS2493 Tool/software: I'm trying to replace a system with a TPS2493 with a TPS2663.
The TPS2493 isn't the problem; I'm trying to reduce the circuit size.
The TPS2493 can be soft-started by connecting…
Part Number: TPS2663
Tool/software:
Hello Team,
We are using the IC TPS2663x in one of our applications. The input voltage is 24V. The current limit set is 4A. Under voltage is set to 18V and over voltage is set at 33V.
Can you please review the…
Part Number: TPS2663 Tool/software: Hi Expert,
1.According to the specification, I_R123 needs to be greater than 2uA. This is to provide the leakage current requirements of UVLO and OVP. It cannot be too large to affect the input shunt. How is 2uA determined…
Part Number: TPS2663 Tool/software: Hi team,
Does this device meet the surge resistance performance specified in the SAE J1455 standard? If you have any test data, please let me know.
Best Regards, Ryu.
