Hi Sarumathi,
Thanks for reaching out!
Can you resend your schematic for review. What is the max load current ? Have you looked at TPS2663 device? It is the integrated solution for the same function and would work up to 6A.
Best Regards, Rakesh
Part Number: LM5050-1 Other Parts Discussed in Thread: TPS25982 , TPS2663 A 24V operating voltage for a BLDC motor controller should be secured against overcurrent 6A (10A). The motor controller increases the protected voltage to approx. 26V when braking…
Hi Sam,
Using the TPS2121 to pull 3A of continuous current at this high temp would more than likely push the TPS2121 to its limit, so I would not recommend it for this application. I would not recommend the implementation of two TPS2121 in parallel…
Hi Jason,
Thanks for the details.
Please look at TPS2663 (fig 53 in the datasheet) or TPS25947 parts. These looks to be better fit for your needs.
Best Regards, Rakesh
Hi Yang,
What is the max load current. ? For systems, up to 6A load current TPS2663 can be used. For higher current systems, LM74800-Q1 can be used for protecting the load from surges.
Best Regards, Rakesh
Part Number: TPS1663 Other Parts Discussed in Thread: TPS2663 Hi support team,
About TPS1663 and TPS2663,
Is there a function that allows me to adjust the time so that it will not shut off immediately when an over current (inrush current) comes…
Hi Yang,
I will check with the team and let you know the tolerance of the 1Mohm resistance.
We have not evaluated the device behavior for Rilim value <5.36kOhm and cannot guarantee the device functionality. For higher current application, please propose…
Part Number: TPS1653 Other Parts Discussed in Thread: TPS2663 Dear Sir
We are using TPS1653 Efuse and performing some of the tests i.e EFT,Surge and EMI at the input. We are looking our device to pass in Category A. but as per the documentation as…
Hi Walter,
Welcome to E2E!
In such application, you would need back-to-back FET configuration like the one discussed in app note https://www.ti.com/lit/an/snva683/snva683.pdf
What is the current level of your system and end equipment ? TPS2663 is…
