Part Number: TPS2663 Hi Sir,
My customer use TPS26630 for 6A current limit application. They report FLT pin is always low at their board and current limit is triggerd at 4.1A. Is there anything we have to take care at customer's board? Thanks for your…
Part Number: TPS2663 Tool/software: I want to use two TPS26631 eFUSEs for priority power multiplexing of two 48 VDC supplies.
In section 10.3.2 of the datasheet it is stated the following: "TPS2663x devices provide a simple solution for priority power…
Part Number: TPS2663 Other Parts Discussed in Thread: STRIKE , Lets consider following example: I have a Circuit with a nominal voltage of 24 V. If the output side of the TPS2663 drops below 18 V I want PGOOD to go low. Nevertheless, I do not want the…
Part Number: TPS2663 Hello, I have a question regarding the TPS26632 IC.
The circuit diagram is configured the same as the TPS26632 EVBOARD.
The test was conducted with input voltages of 12V and 24V.
In case of 24V input voltage, E-FUSE operates…
Part Number: TPS2663-166EVM Other Parts Discussed in Thread: TPS1663 , TPS2663 Hello Team,
I would like to see if there is a possibility for an answer related to a failure that occurred during a test and resulting in the damage of the EVM board.
Short…
Part Number: TPS2663 Hi Team,
Do we have any recommendation of RCB and RPP FET in the application of VBUS = 28V@5A for notebook type-C PD3.1 EPR sink design?
Best Regards,
Jaden Yue
Part Number: TPS2663 Hi,TI Team.
Please tell me about the OVP pins of the TPS26630.
Is it possible to make the OVP pin floating to disable the OVP function on the TPS26630?
The UVLO pin cannot be left floating, can't the OVP be as well?
Best…
Part Number: TPS2663 Hi team,
My customer has a specific design requirement with TPS26630 or TPS26631, and would like to check if ILIM setting on-the-fly is workable. It needs to decrease the I(OL) to half after PGOOD goes high by paralleling another…
Part Number: TPS2663 Good day,
Would it please be possible that you send me an unencrypted model of the TPS2663 PSpice model. I have a large simulation currently running in LT Spice and would like to make a compatible model of the TPS2663 to see if…
Part Number: TPS2663TPS26631 Overcurrent survey test.pdf
For the TPS26631 IC, check the overcurrent operation with the circuit in the attached document. When I was doing it, I was expecting it to behave like the datasheet It's a different move. Specifically…
