Part Number: BQ25756 Other Parts Discussed in Thread: TPS25751 , TPS26750
I am looking to leverage the much-increased power capabilities of USB PD-EPR in a battery charging application with the BQ25756 battery charge controller.
On page 71 of the…
Part Number: TPS25751 Other Parts Discussed in Thread: TUSB320LAI , , TPS25810 , TPS25740B , TPS25740 , , MSPM0C1104 , TPS26750
Tool/software:
Dear Texas Instruments Support,
I am currently working on a project that involves configuring the TUSB320LAI…
Hello Ethan,
Thank you for your swift response.I will ensure that the current sense filters are positioned in as close proximity to the IC as is feasible.
The inductor used was: https://www.mouser.pl/ProductDetail/710-7443641000B I acknowledge that…
Hi Darren,
Thank you for reaching out!
There is a particular process to update the EEPROM image over I2C. Please see our new application note describing the process. In the meantime, you can reference the TPS26750 Technical Reference Manual for more…
Part Number: TPS25751 Tool/software: Hello,
I'm attempting to load the patch bundle from the Embedded Controller (STM32, in our case) onto TPS25751. I am using the TPS25751EVM and following the Application note: Using an Embedded Controller (EC) to…
Hello Conor,
Thank you for reaching out.
Conor said: Is this required even when we only need to generate a bin file, or is it only necessary when flashing directly to the device?
In order to use the Application Tool, you need to download the TI…
Hi Jean,
I've compelted the schematic checklist and I've color coded some observations. The major observation is the drain connections, these pins are not supposed to be connected to ground. They are only supposed to be shorted to the other drain pins…
Hello Jay,
Thank you for your reply.
The PD Controller application customization tool provides a way to customize and initialize the settings of the PD Controller. The PD Controller application binary can be pushed over from a Tiva MCU through I2C…
Part Number: TIDA-050047 Other Parts Discussed in Thread: TPS25750 , BQ25792 , TPS26750 Hi all,
I have a customer currently considering to use the BQ25792 and the TPS25750 but had a question about their interaction with each other and using a PSU: …
Hi Joel,
Joel Rupp said: 1. The tool ignores the port selected in the settings, and always tries to connect to the lowest port when connecting a new port. For example when power cycling the evm, I disconnect the programming cable and then reconnect…
