Part Number: TPS27081A hi,
I'm looking for a power-path solution, 2 inputs (1 battery up to 6-7V) and a usb input.
when the usb is in has the priority. battery is not rechargeable.
I was looking at load switches but are not suitable for or-ing …
Part Number: TPS27081A Other Parts Discussed in Thread: TPS22975 , TPS22918 , TPS22971 , Hello,
We would like to see the waveform of turn-on. The condition is Vin = 0.9V or 3.3V. The rise time is approximately 10~50us.
It would be helpful to share…
Part Number: TPS27081A Dear TI,
Below is the load switch circuit. (Please refer to the external pin reference because the IC internal circuit is wrong.)
The input is (4pin) 3.8V and the ON/OFF (5pin) is OFF state Low (0V). (6pin also 3.8V) In this…
Other Parts Discussed in Thread: TPS27081A , TPS22918 I have questions about TPS27081A.
Question 1.
- Can the IC operate Q1 by inputting LOW to R1/C1 pin regardless of status of EN pin?
Question 2.
- When Q1 is in the ON state, can this IC…
Part Number: TPS27081A Other Parts Discussed in Thread: CSD17484F4 Hello,
In your load switch, TPS27081A, what is the gate capacitance(or charge at voltage) of the high side p-channel fet. A pullup resistor(R1) is required to turn off the p-ch fet,…
Part Number: TPS27081A Other Parts Discussed in Thread: TPS22918 , TPS22975 , TPS22958 I am using the TPS27081ADDCR device. I followed the configuration shown in Figure 13 Standard Application Diagram of the datasheet.
Part Values:
R1: 10K ohms R2…
Other Parts Discussed in Thread: TPS27082L , TPS27081A Hey team,
I was looking at the TPS27081A and the TPS27082L for an adjustable slew load switch and I was unsure what is the main difference between those two. Can someone shone some light on what…
Other Parts Discussed in Thread: TPS27081A Hi Team,
Do we have the data of TPS27081A PFET turn on maximum VGS?
From below TI reference design, battery operating range is 0.8-1.7V, does that mean PFET will turn on when VGS = -0.1V?
As PFET Vdrain…
