Part Number: TPS2H160EVM Other Parts Discussed in Thread: TPS2H000-Q1 , TPS2H160-Q1 Hi,
I used the TPS2H160EVM to control LED string.
The LED string consists of five LED's each with a 2-V drop and require 150-mA current.
The LED series resistor…
Hi Jegan,
The TPS2H160 has an EVM that uses the chip, you can use that as a reference for your design:
https://www.ti.com/tool/TPS2H160EVM#tech-docs
https://www.ti.com/lit/ug/slvuas9/slvuas9.pdf?ts=1753901671638&ref_url=https%253A%252F%252Fwww.ti…
Part Number: TPS2H160-Q1 Other Parts Discussed in Thread: TPS2H160EVM Dear expert,
Our product containing several TPS2H160A-Q1 as power outputs fails to pass the conducted susceptibility test in the range between 250 KHz and 1.1 MHz.
To investigate…
Another option is ordering the Evaluation module which will provide you with the most accurate device behavior.
https://www.ti.com/tool/TPS2H160EVM
Best Regards,
Elizabeth
Athiamaan,
Given the appearance of the soldering/board on the picture, I would highly recommend re-running this test using the TPS2H160EVM. I suspect there might be a short/issue with the soldering here which is causing unexpected behavior and using…
Kuramochi-san,
I can go test this using the TPS2H160EVM in the lab today to verify behavior on our part and rule out any issue on the TPS2H160 side. In order for the test to be meaningful, however, a schematic on how the TPS2H160-Q1 is connected would…
