Part Number: TPS3420 Hello team, can you help with the below?
On the DRY0006A (USON) Package, can you tell me if the side “dimples” are bare copper or plated? If plated, what is the plating?
Thanks!
Part Number: TPS3420 Tool/software: Hi expert,
May I clarify with you if Vcc and PB1/PB2 inputs of TPS3420 has any connection path may cause leakage current or any side effect if customer provide separate supply 5V for Vcc and 3.3V for PB1/PB2?
…
Part Number: TPS3420 Tool/software: Hi Team,
We want to replace Richtek with TI.
May I have your help to provide p2p solution for RT9829GQW and RT8299AZQW ?
Thanks.
https://www.mouser.tw/datasheet/2/1458/DS9829_00-3104927.pdf
https://www.mouser…
Part Number: TPS3420 Other Parts Discussed in Thread: TPS3421 Hello,
I'm looking at the differences between the TPS3420 and the TPS3421 and the primary difference seems to be the fixed RST on the TPS3421. With the TPS3420, what would it take to switch…
Part Number: TPS3420 Hi Experts,
Our customer would like to receive a spice model for the tps3420 component. If this is available and can be provided to our customer, please share here. Thank you.
Best regards, Gerald
Part Number: TPS3420 Other Parts Discussed in Thread: TPS3421 , TPS3422 Dear Experts, please refer to below schematic. I have some design questions about TPS3420. Please give me some suggestions. Best regards.
(1) If I just use single channel (PB1)…
Part Number: TPS3420 Other Parts Discussed in Thread: TPS3899 Hi team!
Using the TPS3420 as a reset pushbutton where a reset is performed by holding the power button for about 10s typically. Sometimes, there is very little current drawn on Vsys, so…
Part Number: TPS3420 Hello, My circuit has an initial condition of PBx powered logic high and VCC floating. For above situation, I see potential appear on VCC. Could you comment if this is expected behavior? Thanks!
Part Number: TPS3420 Hi Team,
Regarding TPS3420, understand from the datasheet that this reset IC monitors 2 inputs when simultaneously held low and output an active-low reset pulse signal.
If we were to connect the 2 inputs together to a switch…
Part Number: TPS3421EGEVM-156 Other Parts Discussed in Thread: TPS3420 , TPS3421 , TPS3422 Per the TPS3421EGEVM-156 Evaluation Module manual, the evaluation module can be modified to evaluate the TPS3420 by removing R1 and R2, and shorting TS to GND.…
