Part Number: TPS3606-33 Hello,
I am using the TPS3606-33 part in a battery powered embedded design. The schematic for the design involving the TPS3606-33 part is shown below.
For this design the VBAT pin is driven from the output of a 3.3V regulator…
Part Number: TPS3606-33 Hello There,
I am using Power Fail Comparator Feature of TPS3606-33. I am monitoring 5V with Resistor divider of R1 = 1.664MOhms & R2 = 664kOhms. So VPFI = 5V * R2 / (R1+R2)=1.426V.
Whenever 5V drops below 4V system thresold…
Part Number: TPS3606-33 We are using the TPS3606-33 part. The input is the Aux supply which provides VDD = 3.3V & we have battery backup of VBAT = 3.6V.
What we have observed is that; if VBAT is low <1.5V, and if VDD of 3.3V is applied, sometimes VOUT…
Part Number: TPS3606-33 Other Parts Discussed in Thread: TPS3600 , TPS3610 Dear,
I am using TPS3606 and i have observed that when the WDI pin is pulled high to 3.3V , at this point the WDI had voltage pulsating from 3.3V to 3.15 (ON-OFF-ON state) and…
Hi Michael,
I agree with your suggestion and usage of the PFI and PFO pins along with Mswitch to try and achieve a switch over voltage closer to ~3.2V for the TPS3606-33 part. Luckily the design I am working with does use the PFI and PFO pins along…
Other Parts Discussed in Thread: TPS3606-33 We have a question about TPS3606-33.
Please tell us the value of R1 and R2 in datasheet p.3 "functional schematic".
Best regards,
Takahiro Nishizawa
Part Number: TPS3606-33 Other Parts Discussed in Thread: TPS3705 Hi there:
our customer would like to check an application with replace the MAX706 (supervisory circuit); Block diagram as following.
The idea is about using CPLD signal (saying BMC_RST…
Part Number: TPS3606-33 Other Parts Discussed in Thread: TPS3600 TPS3606 : what is VSW, mentioned in the datasheet Hello, The VSW parameter is not defined in the TPS3606 datasheet (not defined in the TPS3600 either) ; what is VSW's value ? Thanks, St…
Part Number: TPS3606-33 The query is regarding the battery freshness mode activation.
We are following the below sequence to activated BFM mode
We need to know:
What is the recommended time till PFI (Step 3) remain high before we execute Step…
Part Number: TPS3606-33 We are using TPS3606 Battery Backup and Supervisory IC in one of our product SICAM FCM.
The query is regarding the battery freshness mode activation and de-activation.
During run operation we are putting battery into Freshness…
