Part Number: TPS37 Tool/software: Hi team,
I found some applications here for AC Voltage detection. My customer wants to detect whether AC voltage exists or not. Do you have a simple way to detect AC voltage?
VAC=480V
www.ti.com/.../slvaf53.pdf
Part Number: TPS37 Tool/software: What is the maximum voltage output on these pins: CTS1, CTR1, CTS2, CTR2?
That is, what voltage shall I select for the capacitors I use?
I can't find this in the data sheet. Is the voltage related to Vdd? I do note that…
Part Number: TPS37-Q1 Tool/software: Hello team, Could you tell me recommended value of output pull-up resistor for the TPS37-Q1 ? I am considering using the /RESET1_OVOD and /RESET2_UVOD outputs pulled up to VDD(3.3V) with a 2.2kΩ resistor. Is there…
Part Number: TPS37-Q1 Hi team,
In order to avoid voltage drop at SBD in red circle below, I would like to connect SNESE pin directly to VBAT terminal.
TVS diode is placed as below.
I concern reverse battery condition and ISO 7637-2 pulse1(-100V), pulse3a…
Part Number: TPS37-Q1 Other Parts Discussed in Thread: TPS37 Hi team,
I have a question about TPS37_38-Q1 Functional Safety pin FMEA description below.
"For fixed voltage threshold option where the applied voltage to SENSE1 is less than 2.7V...."…
Part Number: TPS37 Hello team,
Is it possible to get TPS37D, TPS38D/H from the shelf or are they custom configured?
I only found a very limited number of orderable devices, not D or H
Thank you,
Daria
Part Number: TPS3760 Other Parts Discussed in Thread: TPS37 , Hello Team,
will TPS37 model https://www.ti.com/lit/zip/snvmc68 work or is there a PSpice model available for TPS3760, please?
Thank you and Best Regards,
Hans
Part Number: TPS37-Q1
Hi team,
Is there any requirement in order of SENSE and VDD voltage rampup/down?
From Absolute Max rating perspective, both pin has 70V rating, so there should be no issue even if bias is applied to SENSE pin without VDD.
Is there…
