Part Number: TPS3760-Q1 Other Parts Discussed in Thread: TPS3760 We want to use TPS3760 supervisor IC in our project. In specific, we want to use TPS3760B302DYYR-Q1 and TPS3760BA22DYYR-Q1. But these two are not available to buy. Where can we buy these…
Part Number: TPS3760-Q1 Other Parts Discussed in Thread: TPS37-Q1 , TPS37 , TPS3760 , TPS38 Hi team,
I am searching for an AEC-Q100 alternative to S-19110GABH-M6T1U4 from ABLIC. I see TPS3760-Q1 is recommended by xref tool. However my customer is not satisfied…
Part Number: TPS3760-Q1 Currently, I am using part TPS3760A012DYYRQ1, to monitor low voltage and my voltage to detect as low voltage is 7.5V.
Since the part has configurable sense circuit, there is a leakage current of 10uA through resistor divider.
R1…
Part Number: TPS3760-Q1 Hello TI experts,
I was looking for a part which gives an intimation to microcontroller through digital input pin, when battery voltage reduces to less than 7.5V.
I am planning to make this circuit work when my unit is in low power…
Part Number: TPS3760-Q1
Hi, there is a example threshold voltage calculation in the datasheet like below, does this include all the variation? the VITN is min 0.792 to 0.808, so if I consider worst case, do i need to add +/- 8mV to the "839.4mV ~840…
Part Number: TLV840-Q1 Other Parts Discussed in Thread: TPS3760 Graph ends at 10uF, currently using 2x4.7uF on CT For example if i wanted to achieve a delay of 30-60seconds, is this feasible with this family? Another possibility would be to use several…
Part Number: TPS3760 Other Parts Discussed in Thread: TPS38-Q1 Hi team,
I'm looking for Vin>45V reset IC with small size. As I search if the device Vin>45V, the number of pins are at least 8 Pins.
Supervisor & reset ICs product selection | TI.…
Hi Seungpyo,
Q1.I wonder that How they can detect overvotalge?
The designer of the schematic changed their perspective of the device. The LMS33460 is an undervoltage detector with an active-low output. Meaning that when VIN drops below the threshold…
Hello Ramez,
I would like to suggest supervisor TPS3760-Q1 , which posses overvoltage only capabilities. If this suggestion does not fulfill your requirements could you please answer the following:
1. How many channels are required?
2. What are the desired…