Part Number: TPS3831 Hi,
In this IC, VDD is set to 4.2 V, but RESETN is asserted within 65 ms after VT−, whereas the datasheet specifies a minimum delay (td) of 120 ms. Could you explain why RESETN is being asserted earlier than the minimum timing requirement…
Part Number: TPS3831 Other Parts Discussed in Thread: TLV803E , Dear Team, we are planning to use the TPS3831L30DQNR as a functional replacement for TLV803EA26DBZR, we are aware of the footprint being different, and that the former is push pull vs. the…
Part Number: TPS3831 Other Parts Discussed in Thread: TPS3760 , TPS3779 , TPS3704 Hi,
I know the TPS3831 says that the max recommended current is 8 mA, but is the device short-circuit protected? We have an application where the RESET output is at 3…
Hi Junichi,
This part does have barrier metal (TPS3831). For the other parts, our product line is not responsible and you will have to inquire about those specifically in those forums.
Thanks, Abhinav.
Part Number: TPS3831 Team,
my customer is describing a similar behavior as can be found here: E2E post .
In some situations, it seems that part does not work as expected and nRESET gets stuck at low-level. They can reproduce the issue if a halogen…
Part Number: TPS3823 Other Parts Discussed in Thread: TPS3831 , TPS3802 , TLV840 , TPS3824 , TPS3704 Hi Experts,
My customer want to replace MAX811 through a pin-to-pin socket, but we all know that there is no DROP-IN REPLACEMENT.
However, I find…
Part Number: TLV809E Other Parts Discussed in Thread: TPS3831 Hello experts,
I have question about MSL Peak Temp of TLV809E and TPS3831.
From TI.com web page, TLV809E is suggested as similar product of TPS3831.
I compared with two devices, and…
Part Number: TPS3831 Hi team,
Customer is using XC6119N17ANR in their project, could you recommend suitable to compete with this part? Does TPS3831 suitable for this purpose?
Thanks,
WIll
Part Number: TPS3831 Hi,
Figure 13 in the TPS3831 data sheet seems odd, or the text on the x-axis is misleading. The x-axis says VDD voltage drop below VIT− (%), what is meant here? Is it 1: The drop in % relative to the VDD start value that takes a…
Part Number: TPS3831 Hi Support team,
Trying to understand figure 11 in the data sheet, here are some questions from the customer
In the datasheet for the TPS3831, the propagation delay t PD_VDD from VDD falling past the V IT- to output is shown…
