Part Number: TPS3842 I am using the TPS3842 and would like to set the tCTS to the minimum value. Should the CTS pin be left open, or should it be connected to GND to achieve the shortest timeout?
Part Number: TPS3762-Q1 Other Parts Discussed in Thread: TPS3762 , TL7700-SEP , TPS3842 Tool/software: Hello team!!
I can't found the Spice model for the some of the part numbers on the website.
Please provide the spice model for the part numbers…
Part Number: TPS3842 Tool/software: Hello,
We use the TPS3842A011DRLR reference. I want to do a simulation (behavioural) but there is no model on this ref.
Could you share at least a more detail diagram of the reset_logic_timer so I can build my onwn…
Part Number: TPS3842 Tool/software: Circuit.pdf
TI
To the person in charge,
The CTS terminal is used in an open state for this component. According to the catalog, the voltage drop detection delay time under these conditions is 5 us. However, the…
Part Number: TPS3842-Q1 Input voltage monitoring function: It is activated when the input voltage is greater than 9V and deactivated when it is less than 7.5V.Similar to ADI's LTC2965, as shown in the picture.
Part Number: TPS3842 Tool/software: I have a question about the Reset time delay for TPS3842.
In the provided data sheet for a reset IC, there are equations that relate the Reset time delay to an external capacitor. Specifically, the constants 2.858…
Part Number: TPS3842
Tool/software:
Hello TI Community,
I am working on a design using an Intel Agilex-5 SoC (A5EDxxx) and need to implement supervision of multiple power rails with the following requirements:
Rails to monitor (with SoC tolerances…
Part Number: TPS3842 Tool/software:
Hello,
In one of our designs, we are planning to use the TPS3842300DRLR voltage supervisor IC. Our design requirements are as follows:
When V_ORING is below 6V, RESET\ should be LOW.
RESET\ should go HIGH…
