Part Number: TPS389006-Q1 Tool/software: I wanted to know the drop across internal MoSFET of NIRQ pin to consider the pull-up. Is Vol in the datasheet the same which I am referring to?
Part Number: TPS389006-Q1 Tool/software: Valeo nominate TPS389006004RTERQ1 in ADAS ECU project, while since it’s a new part for Valeo group, they request to complete the enclosed CIS file. Please kindly help on it. Component information sheet integrated…
Part Number: TPS389006-Q1 Tool/software:
I'm bringing up a new design which has 3 devices attached to a common I2C bus.
I am using SMBus byte read/write commands and able to talk to the CSR's and read known reset values so that is all good. …
Part Number: TPS389006-Q1 Tool/software: Hi team,
My customer is asking me what the internal input capacitance is for the I2C lines on the supervisor. I believe this is different from the capacitive load at the bus that can be a max value of 400pF, but…
Part Number: TPS389006-Q1 Tool/software: The data sheet I received does not have much information. I was asked to pull an Aptiv part number for a 4 channel version of TSP389006009RTERQ1. But the data sheet I have does not call out a 4 channel version…
Part Number: TPS389006-Q1 Other Parts Discussed in Thread: TPS389387EVM , Hello,
I am using the TPS389006-Q1 with the TPS389387EVM Joint Evaluation Module and I have the following flag error inside the following registers:
INT_VENDOR (0x24): 7F TEST_INFO…
Part Number: TPS389006-Q1
Tool/software:
Hi Everyone,
I am using two TPS38900603NRTERQ1 which share an NIRQ Line with a LED and a 560R Resistor pulled to a 3.3V Rail.
There should be a maximum current of 2.7mA flowing. (3.3V - 1.75V LEd)/560R (Assuming…
Part Number: TPS389006-Q1 Other Parts Discussed in Thread: TPS389006 , Tool/software: Hi BU team
What are the differences when tps389006-Q1 pin9 nSync is set high and low? Is it ok that connected sync pin between multiple tps389006?
It is not clear in…
Part Number: TPS389006-Q1 Other Parts Discussed in Thread: TPS389006 Hi,
the Fusion Digital power Device Gui detects the TPS389006 as TPS389004 and therefore only 4 Channels are displayed.
Is there a new software version available which supports 6 channels…
Part Number: TPS389006-Q1 Hello I am a software engineer,
I observed a voltage drop when connecting power supply to a monitor PIN of TPS389006-Q1.
Does the monitor have low input impedance ?
How can I avoid this issue ?
Best regards,
Tom LEVISSE
