Part Number: TPS40211EVM-352 Other Parts Discussed in Thread: TPS40211 , TPS40210EVM , LM25085 We are testing a TPS40211 evaluation board and have the current set at .55A by changing the resistor to .47 ohm. This works from 25C to 100C, constant current…
Other Parts Discussed in Thread: TPS40210 , TPS40210EVM HI,
I have made a DC-DC converter circuit using TPS40210 with 12V to 100V and 0.1A using WEBENCH. so, for making layout i tried TPS40210EVM footprint and gerber files but, i can't get anything. so…
Other Parts Discussed in Thread: TPS40210EVM Hi,
I am using the TPS40210EVM board. I need to know if I could apply 28 Volts at the input for a higher output voltage say 30 volts. I know that C8 has to be changed to a higher voltage rating say 50 volts…
Part Number: TPS55340 Other Parts Discussed in Thread: TPS40210EVM Hello team,
Could you please provide the TPS55340 layout example for HTSSOP package option?
How much width do you recommend for AGND?
Regards,
Itoh
Hi Syed,
Thank you for considering the TPS40210. Please go to the following webpage, and scroll down, then you will find the Order Now section. You should be order either from TI or a distributor.
www.ti.com/.../tps40210evm
Thanks,
Youhao Xi,…
I tried also with an TPS40210EVM (evaluation board from TI) and I found the same behaviour.
With the same load (an wireless AP) with 8-12 Vin voltage.
The TPS40210 goes in OC every 700 ms !!!
the picture below regarding the EVM board only.
This is…
Hi Anthony
Thanks a lot for your answers.
I ordered the TPS40210EVM and received today.
Now, I'm going to test the function on the TPS40210EVM.
Can you please to tell me how can I modify the EVM to get 180VDC output? Can I just use the former design…
Other Parts Discussed in Thread: TPS40210 , SWITCHERPRO , LM3478 , LM3488 , TPS40210EVM Hello,
I am designing a step-up DC/DC converter by using TPS40210 for input of 16V to 40V and 200V output. The output current can be 10mA. By using what WEBENCH and SwitcherPro…
Hi Luis,
The DGQ is probably the easiest of the two packages to solder. The best I can recommend is to keep on trying to clean off the solder shorting any of the pins together.
You could also order the TPS40210EVM for prototyping purposes.
Best Regards…