Part Number: TPS43061 Other Parts Discussed in Thread: TPS43060EVM-199 Hi Sir,
1. We use TPS43061 chip to design a dc-to-dc power, our input is 24Vdc, Output is 36V@3A, the schematic is the same TPS43060EVM-199. We use all the same components in our…
Hello Gary,
In some cases, Webbench Designer is somehow "tricky" to use. It takes a lot of parameters of external components (Diodes, FETs etc.) into account and sometimes the modelling of these components is running into limitations. Also, the error…
Part Number: LM5022 Other Parts Discussed in Thread: TPS43060EVM-199 Using Webench, I've created a pair of power supply circuits. One boosts 24VDC to 32VDC, the other boosts 24VDC to 40VDC. Obviously with same controllers and similar voltages many of…
Part Number: TPS43060 Other Parts Discussed in Thread: , LM5122 I am using EVM TPS43060EVM-199, My Load is switching type ( ON :- 5 ms, OFF :- 5ms, 1.2 Amps MAX)
The Output Voltage dips approx 5 Volts.
Kindly Suggest the solution.
Part Number: TPS43060 Hello, Should capacitor from Vcc pin 10 be connected to AGND or PGND? Various sections TPS43060 datasheet appear to indicate either AGND or PGND: Section 9.2.1 schematic shows C_Vcc (C6) connected between Vcc pin 10 and AGND. Section…
Other Parts Discussed in Thread: TPS43060 , TPS43060EVM-199 I have a circuit with a TPS43060. Input voltage is 24V, and the TPS43060 outputs 48V.
I noticed a strange behaviour at power-up. We have a preload resistor (550Ohm) that charges input capacitors…
Other Parts Discussed in Thread: TPS43060 , TPS43060EVM-199 , TPS43000 , TPS43061 , LM5122 Hello, during my thesis I'm using the swichting regulator TPS43060 with the evaluation board TPS43060EVM-199. For my application, bidirectional current is needed…
Other Parts Discussed in Thread: TPS43060 , TPS43060EVM-199 , TPS43061 Dear All,
I am using the TPS43060 Boost controller with the following design requirements;
Vin: 24V DC
Vout: 52V DC
Iout (max): 1A
The boost controller has been modelled…
Other Parts Discussed in Thread: TPS40210 , TPS43061 , TPS43060 , TPS43060EVM-199 , LM5122 Dear Sir
I am working on tps40210
input Voltage =9.9 to 12.60 volt Dc
Output Voltage= 18.85 volt
Your product is designed for 4.7 Amp i want to use it for…
Part Number: TPS43060 Other Parts Discussed in Thread: , PMP , LM5122 Tool/software: Hi Sir,
I am currently using the TPS43060EVM-199 to simulate a design with the following parameters: Input: 12V Output: 20V @ 7.5A
I have modified the components…
