Search tips
Showing 7 results View by: Thread Post Sort by
    Answered

  • TPS43061EVM-198: Gerber files for this module

    Resolved
    Part Number: TPS43061EVM-198 Tool/software: Are the design files available for this evaluation module? I'm particularly looking for the gerber files. I have searched your website but haven't been able to find any.
    • Resolved

  • TPS43061EVM-198: TPS43061EVM-198 5Volts to 12Volts -right?

    TI Thinks Resolved
    Part Number: TPS43061EVM-198 Hi! About TPS43061EVM-198: I made a search for up-stepper / booster Vin 5 Vout 12 and got that suggestion from the ti-website. In the discription it say's: "The EVM operates from a 6V to 12.6V input (9V nominal) and provides…
    • Answered

  • TPS43061EVM-198: What is the current output when Vout is changed from 15V to 24V?

    Resolved
    Part Number: TPS43061EVM-198 Other Parts Discussed in Thread: CSD86330Q3D This part's data sheet shows its current output when Vout is set to 15V. I'm wondering what is the current output when Vout is changed from 15V to 24V? Table two in this part's data…
    • Resolved

  • TPS43061EVM-198 upgrade to 5A, 13V

    Could I upgrade this development board to 13V, 5A output ? Which components I need to change? Please help.
    • Answered

  • TPS43060: Which is reliable WEBENCH and Calculation Tool(SLVC471) ?

    Resolved
    Part Number: TPS43060 Other Parts Discussed in Thread: WEBENCH-CIRCUIT-DESIGNER Dear Specialists, My customer is considering TPS43060 and has a question. I would be grateful if you could advise. --- I have a question about the result between WEBENCH and…
    • Resolved

  • RE: TPS43061: bottom mosfet of boost controller overheats

    TPS4306x_BOOST_CALCTOOL_REVB.xls TPS43061-calculation.txt tps43061 calculations (11) Dmax = (Vout - Vinmin)/Vout = (24.55-10)/24.55 = 14.55/24.55 = 0.593 Dmin = (Vout - Vinmax)/Vout = (24.55 - 14.4)/24.55 = 10.15/24.55 = 0.413 (12) …
    • Answered

  • TPS43061: High amplitude ringing at the output

    Resolved
    Part Number: TPS43061 I measured excessive ringing at the output of the EVM and wanted your help to either correct a possible mistake in the way I'm testing it or to provide clarification to understand the discrepancy I see against the documentation.…
    • Resolved

Didn't find what you are looking for? Post a new question.