Part Number: TPS4H000EVM Team,
We have a Disty that has provided the following information concerning the TPS4H000EVM:
All of our inventory is populated with TPS4H000BQPWPRQ1 but the user guide lists TPS4H000AQPWPRQ1 as the main IC. Can you confirm…
Part Number: TPS4H000-Q1 Other Parts Discussed in Thread: TPS4H000EVM Hi, I would like to use the TPS4H000 for supplying sensors with power, 24 V DC nominal.
We did some initial testing to check if the TPS4H000 will continue to power the remaining channels…
Hello Paolo,
Tim is on vacation for the week, but I assume he recreated your conditions from #5 as close as possible; however, he most likely used what was on the EVM in terms of the CL resistor. You can view the BOM for the TPS4H000EVM here: TPS4H000…
Hi Gokul,
I would recommend checking out this FAQ on considerations when PWMing high side switches: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1352879/faq-tps1h000-q1-pwming-with-ti-high-side-switches…
Part Number: TPS1H100-Q1 Other Parts Discussed in Thread: TPS4H000EVM , TPS1H100EVM
Hello team,
Please see below question from the customer:
Can TPS4H000EVM can be used to evaluate TPS1H100BQPWPRQ1?
Do we have any app note which gives more insight…
Part Number: TPS4H000-Q1 Hello, for drive led lamps (12V and 3,8W), I use TSP4H000A so I can have the fault indication and the chip turn-off the output in case of short circuit of overload current. The led lamps normally are turn-off, some times blink…
