Part Number: TPS50601-SP Hello,
In the datasheet, you request a 10k pull-down resistor for synchronization with an external clock. Is it ok to use a resistor of lower value (e.g. 1k) ? My external clock will start with a weak pull-up of 10k during 50ms…
Part Number: TPS50601-SP Other Parts Discussed in Thread: TPS50601A-SP Hi,
tps50601-sp simulation model is encrypted for PSPice simulator. We are using a different simulator and are wondering if you could provide an unencrypted version of the simulation…
Part Number: TPS50601-SP Hello, I am wondering if there is a spice model for the TPS50601-SP. I know there are transient and average models but I'm not sure that will simulate the same part behavior. Thank you for your help.
Part Number: TPS50601-SP Greetings,
A customer need Thermal Resistance from junction to case (top side) of TPS50601-SP.
P/N: 5962R1022101VSC package CFP (HKH) | 20
do you have this info?
Thank u in advance.
Regards,
Part Number: TPS50601-SP The TPS50601-SP datasheet has the typical and maximum value for the minimum on time but only a typical value for the minimum off time. Can it be assumed that percentage tolerance of the minimum off time is the same as the percentage…
Part Number: TPS50601-SP Bode plot seems to give proper results at around 115KHz but once i reach lower frequencies around 104KHz there is a phase wrap and an unexpected peak on the gain. my input voltage is 3.351V and output current is 0.894A. my switching…
Part Number: TPS50601-SP I would like to evaluate the subject-mentioned part and would like to put a similar non-rad hard, less expensive, non-flatpack part on my prototype board. Is there something very similar to it?
Part Number: TPS50601-SP Hi Space team,
I have a question regarding the TPS50601-SP (non-A version).
Can you guys confirm two aspects of the package:
The thermal pad needs to be connected externally to PGND? I see footnote #1: "Thermal pad (analog ground…
Part Number: TPS7H1101A-SP Other Parts Discussed in Thread: TPS50601-SP Hi Team,
In page 21 of the datasheet regarding the parallel operation, a POL TPS50601-SP is mentioned to be used as an input source. Can you clarify if this is an input or just use as…