Part Number: TPS51123
Hi Team,
A Japanese customer can not post issue in E2E, so I help him to post this technical query.
The 33uF (P1) connection to VREG5 of TPS51123 is described in the data sheet. I understand. Also, VREG5 is involved in the Switcher…
Part Number: TPS51123 Other Parts Discussed in Thread: TPS51125 Hi,
Because we saw the enable pin of TPS51123 (ENC) will enable channel 1 and channel 2 at the same time, is it possible to let one channel output faster than the other one?
I'm not sure adding…
Part Number: TPS51123 In the related question Edwin Zang said that:
The minimum TRIP voltage is 515mV, so the minimum TRIP resistance is 51.5K ohm.
However, the datasheet says:
Is there a mistake?
Part Number: TPS51123 Dear Team,
My customer has a question about the threshold of ENC.
The minimum threshold is 2V in datasheet, but measured with 1.5V instead.
The schematic is almost the same as in datasheet. Will there be anything we to check first…
Part Number: TPS51123 Other Parts Discussed in Thread: TPS51225C , Hi expert,
My customer is using TPS51123 as their NB 5V/3V application. When I'm checking schematic, I found out VREG3/5 should place 10uF/33uF near IC. Our question is could we place lower…
Other Parts Discussed in Thread: TPS51123 Hi
My customer has question.
For TPS51123 of VTRIPx
It is write as "TRIPx voltage is under a certain thershould (typically 0.4V),
the switcher channel concerned is shut down." in the data sheet P23.
…
Other Parts Discussed in Thread: TPS51123 Hi
I have a question about"TPS51123 DataSheet P24[Choose the Output Capacitor(s)]"
I want to know the ”ESR” values necessary for the output capacitor.
It does out value even using Equation…
