Part Number: TPS51124 Hi ,
1. 5VSB_ A is stable at 5V
2. 5VSB (input of the upper MOS), this voltage I slowly adjust from 5V to around 3.9V.
When I lowered 5VSB to around 3.9V, the second V2out output was supposed to be 3.3V, but now it has become…
Part Number: TPS51124 Hello,
we have to change the top FET in an existing design with TPS51124.
When examining the switching using the given min. dead times in the datasheet (10ns / 30ns), a shoot-through could appear with the new top FET when the…
Part Number: TPS51124
Hi Team,
A Japanese customer has a inquiry on how to select pull up resistor on PG pins.
Can I get your valuable suggestion?
He want to know the relationship between the pull-up resistance value of PGOOD1 and 2 of TPS51124…
Hello user,
Out normal support person for TPS51124 is on holiday, but I believe I know the answer.
If you apply 5 V to the TPS51124 without the 12 V (or other voltage) to the external switching FETs and allow the converters to enable, the TPS51124…
Part Number: TPS51124 Hi:
Please confirm the ESD protection level of TPS51124RGET device (I see other chips have this parameter), and the data sheet does not see the relevant parameters. Thank you!
Part Number: TPS51124 Team-
We have a customer who is implementing the TPS51124 dual DCAP controller with all-ceramic output capacitors. They have included the ripple injection networks commonly recommended for the single controllers.
Application…
Other Parts Discussed in Thread: TPS51124 , TPS51123 Hi all. Could you tell me does the TPS51124 have the function of pre-bias start up? I Would like you to reply me immediately. Best Regards, Sho Ogane
Hi Bishnu,
TPS51124 has been transferred to Japan application team. If you have any question about this part. Please contact Shuichi Ishikawa ( s-ishikawa@ti.com ) directly.
Thanks,
Nancy
Other Parts Discussed in Thread: TPS51125A , TPS51218 , TPS51124 Hello,
In TPS51124, TPS51125A, TPS51218, could we simulate the function of over current protection corresponding each value of Rtrip?
BR,
Thu
Part Number: TPS51216 Other Parts Discussed in Thread: TPS51124 , , TPS54116-Q1 , TPS53659 , TPS51116 Hi TI expert,
Can TPS51216RUKR be used to power DDR4 U-DIMM? No such content mentioned in the datasheet.
What’s the max current of each output…
