Part Number: TPS53319 Hi TI expert,
We have an interesting question from your file ( SLUA851A, on page5, Figure 4), and there is a reference circuit taking about minimizing switch ringing by adding RC snubber.
However, the RC snubber was connected…
Part Number: TPS53319
Hello,
My application is converting voltage from two lithium ion batteries (roughly 5~9 V) to 1.2V, 3.3V and 5.0V. I've got three TPS53319 controllers to do the job.
I'm testing the 1.2V one, but it gives zero output. The only…
Part Number: TPS53319 Hi,
i am using TPS53319DQPT part in my design.
While checking silicon expert report of TPS53319DQPT i have observed that some RoHS exemption Like it is affected CHINA RoHS and REACH etc...
We require that the devices used…
Part Number: TPS53319
Hi TI experts,
i used TPS53319 to convert 11V to 3.3V/10A. Tested transient/stability/ripple/startup/shutdown waveforms at 25C, all looks good.
But at 45C, observed 3.3V voltage glitches at ramping up. Planing…
Part Number: TPS53319 Hi Expert,
As we know some times we recommend to add ripple injection to improve transient performance.
my question is how to select voltage rating for C1?
Regards,
Mark
hi sir
The problem has solved，I agree with your judgment on this issue.
But I have some new questions.
I have read the datasheet of TPS53319,it recommends the feedback resistors are 10k+
and I use TI WEBENCH POWER DESIGNER to design buck circuit…
Part Number: TPS53319
Hi support team.
I have a question regarding Regarding recommended operating condition for EN voltage.
I have referred to the following post.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management…
Part Number: TPS53318 Other Parts Discussed in Thread: TPS53319 , Dear Team,
I would like to ask you about TPS53318 and TPS53319. 1. Are they fully pin to pin? In addition to the current capacity, one is 8A and the other is 14A, what are the main…
Hi Adarsha,
The simulation time on WEBENCH is limited 15mins. The simulation time is dependent on the switching frequency, analysis parameters, type of simulator and operation of the device.
For TPS53319, the startup test bench stop time(2.5ms) is…
