Part Number: TPS536C7 Dear TI Team:
We have component TPS536C7 in our design.and usage is 3.
Now we have SMB_CLK/DIO connected to I2C_SCL/SDA,
But the pin SMB_ALERT# is connected to CPLD, and Now we plan use CPLD collects all SMB_Alert singal and other…
Part Number: TPS536C7 Other Parts Discussed in Thread: TPS53641 , Hello expert,
My customer 's end customer would like to know the below questions on TPS536C7 0xC2 address. Since they re-spin TPS53641 to TPS536C7 and original address is 0x61 which is 0xC2…
Part Number: TPS536C7
Hi TI teams,
We have experienced a burn of a power stage using the TPS. Find below the .xml of the configuration:
1513.TPS536C7 5.0 Address 88 Project File 2.xml
We are using 12 phases. Total Cout is 22.03 mF. Each Power Stage has…
Hi Eliot,
This may be another issue to look into. Can you start a new E2E thread for this, and assign that to me.
A quick answer to your question is that. 1. Pk to Pk ripple is 16mV. This seems okay.
2. Freq. of the oscillation is ~ 3MHz -- willing to…
Part Number: TPS536C7 Dear TI Team:
I have no experience on large current power design with multi-phase controller, there are some items need your help.Thanks!
1. I saw there are some items talked about IBIS simulation about TPS536C7 on TI forums, Could…
Part Number: TPS536C7 Hello expert,
We connect opposite way for input current sense like CSP/CSN swap, and we would like to report input power value from PMBus. And we ignore input current sense by set READ_IIN as Calculated IIN. But we still got negative…
Part Number: TPS536C7 Hello expert,
My customer would like to know the store configuration command is sending byte to 0x11 or 0x15. One is store_default_all and once is store_user_all. Thanks a lot!
Best regards,
Ann Lien
Part Number: TPS536C7 Hello expert,
Do we have IBIS model for TPS536C7B1 . Customer would like to do I2C simulation. If no, could we check if there is any other method to simulate I2C bus? Thanks a lot!
Best regards,
Ann Lien
Part Number: TPS536C7 Hello expert,
My customer would like to set the Vout level on 3.3V. I checked the VBOOT_CHA it seems like we need to add external voltage divider from VSP and VSN. Does it mean the reference is not 3.3V and we need to use voltage divider…