Part Number: TPS53513 Other Parts Discussed in Thread: TPS53515 , , TPS548A20 , TPS53915
The TPS53515 is in FCCM when the mode pin is connected to either PGOOD or VREG. What is the minimum voltage requirement for connecting the mode pin to PGOOD?
The MODE…
Part Number: TPS53915
I am using repeating TPS53915 with 12V input and 3.3V output. The output is rather different from the 4 DC-DC converter.
DC-DC1 = 3.418V ;Vfb = 0.618V
DC-DC2 = 3.268V ;Vfb = 0.592V
DC-DC3 = 3.288V ;Vfb = 0.596V
DC-DC4 = 3.416V ;Vfb…
Part Number: TPS53915 Other Parts Discussed in Thread: TPS53515 I have downloaded the TINA model for the TPS53915 but there does not seem to be a way to change the switching frequency of the regulator. THe model seems to switch at around 1MHz which isn…
Part Number: TPS53915 Other Parts Discussed in Thread: LM2734 , TPS54320 Hi,
I'm trying to find a converter or controller that could adjust output voltage from 1V to 5V/1A. Seems TPS53915 is a good solution but the interface is PMBus.
Does TI has …
Gerald Millar
I am not aware of a PMBus enabled termination LDO, but since the VTT and VTT_REF specification is 1/2 of VDDQ, a Tracking LDO without PMBus would generally be a valid, or even preferred solution to a programmable one. You can recommend…
Part Number: TPS53915 Other Parts Discussed in Thread: TPS549B22 I found an article for a remote sensing application such that the ASIC itself is supplied with the full desired voltage (assuming a good ground with almost no voltage difference). I don…