Part Number: TPS54116-Q1 Tool/software: Dear TI-technical engineer,
Our customer performed a physical analysis of a good sample of TPS54116QRTWRQ1. When the cross section of the resin package was polished, erosion of the mold resin was found on the top…
Part Number: TPS54116-Q1 Hi,
For the following part (TPS54116-Q1RTWRQ1), I simulated in WEBENCH but for steady state it won't come properly. The graph is not toggle in straight way but it slightly increasing. Could you rectify the issue.
Thanks, …
Part Number: TPS54116-Q1EVM-830 Hi,
From your User Guide - SLVUAT4-August 2016, Page 19: Figure 22 - I notice that your analog ground is created in the power plane instead of the ground plane.
Is there any reason for doing so?
Regards Michael
Part Number: TPS54116-Q1 Hi
I am using TPS54116-Q1 for DDR4 power. I am not maintaining seperate grounds i.e analog and digital grounds.
For all pins I am using common digital ground.
Is it ok?
With Regards
M K Raju
Part Number: TPS54116-Q1 Hello,
I have made the typical application schematic given on page 25 of the datasheet on Pspice for TI. I am unable to simulate the schematic. I have followed all the component values as per the typical application circuit. The…
Part Number: TPS54116-Q1 Hello expert, My customer want to know recommended termination for VTTREF during they don't use this pin as external circuit's reference. This is because, SoC side's recommendation for reference is that it should be generated…
Part Number: TPS54116-Q1 Dear Support,
We have observed that when more voltage beyond absolute maximum of 7V is given to TPS54116-Q1 IC. Input is getting shorted to output SW pins and it is damaging the output power connected circuits. We wanted to have…
Part Number: TPS54116-Q1 hello.
I made a board design with TPS54116-Q1.
The design is 1.35V output, and the startup waveform is as shown below.
In the simulation of WEBENCH® Designer, when the load is 0.1A , it looks like the figure below.
In the…
Part Number: TPS54116-Q1 Hello,
Our power supply circuit is configured using TPS54116QRTWTQ1. Regarding the PGOOD signal (6pin) of TPS54116QRTWTQ1, I couldn't find any mention of the value of VOL for PGOOD on the datasheet. Could you please tell me the…
