Part Number: TPS54202H Other Parts Discussed in Thread: TPS54202 Zerstörung des Low Side Fet im TPS54202H
Die Abbildung zeigt einen Schaltungsausschnitt des TPS54202H, wie dieser bei uns verwendet wird. Es treten immer wieder Fälle auf, bei denen…
Part Number: TPS54202 Tool/software: Hello,
What is the difference between TPS54202 and TPS54202H controllers? From what I can tell, TPS54202 can have its EN pin floating for normal operation, whereas TPS54202H needs to have a pullup resistor to VIN…
Part Number: TPS54202H Tool/software: Hello, My customer is evaluating TPS54202H and they don't want it to enter eco mode. The datasheet says that it enters when the peak current is lower than 300mA(TYP). Is MAX value for this 300mA avaialble? They can…
Part Number: TPS54202H Other Parts Discussed in Thread: TPS54202 1. This DC-DC uses a TPS54202H chip from TI manufacturer, and the maximum output in the manual is 2A;
2. The input in this diagram is 12V, the output is negative pressure -12V, and the…
Part Number: TPS54202H Other Parts Discussed in Thread: TPS54202 Hello,
Built boards with the circuit in the linked forum post.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1320239/tps54202h-schematic…
Part Number: TPS54202H Other Parts Discussed in Thread: TMUX6221 , TPS54202 Hello,
I need a negative rail to supply some TMUX6221 analog switches. On the input side I have +24V available which then goes through a TPS54202H DC-DC converter to get +5V…
Part Number: TPS54202H Hi
We uses TPS54202HDDCT to design a Step-Down Voltage Converter.
Vin is 20V, Vo is 5V ,Io is 1A
Could you help check the schematic? thank you
Part Number: TPS54202H Other Parts Discussed in Thread: TPS54202 I am using the TPS54202HDDCR for a 24V to 5V (0.5A) regulator. The 24V comes from an isolated regulator and it has a difficult time coming up if the 5V comes up before it so we have added…
Part Number: TPS54202H Hello there,
I am interested in working with the TPS54202H for my application, which will have three output power rails, 3.3 V, 5 V and 12 V from Vin = 24 V, and I am wondering if you could help me clarify a few questions:
…
Part Number: TPS54202H Hi team,
Customer is trying to tie DC24Vinput to EN-pin via 510kOhm as the attached. Could you confirm this is OK? The abs max of EN pin is 7V, it seems it is banned to apply 24V to EN-pin. But 7.3.5 Device Enable mentions that…
