Part Number: TPS54295 Hi team,
Can anyone please share the Feedback resistor for the following spec
Vin=5V
Vout=0.78 and
Vin=5V
Vout=1.05V
Thanks in advance.
Part Number: TPS54295 Hello,
I'm using the component TPS54295RSAR for 12V to 5V conversion. In which the component is enabled with 12 volt(Schematic Attached). With this configuration the system is working fine; In random power cycle the output is not…
Part Number: TPS54295 Hi,
Could you please support me to review power section. As per current design, Dual buck converter is used. output-1 ( 3.3V@1.25A ) is used to source FPGA I/O voltage. Output-2 (1.2@1A) is used to source FPGA core supply voltage…
Part Number: TPS54295 Hi,
It seems that their is error in the webench regarding TPS54295. When using the webench found in the product page, it provide different pin configuration compared to what is found in the datasheet. There is no information about…
Part Number: TPS54295
Hi,
My customer is considering switching output voltage by such as the picture below.
Does it have any problem?
Please let me know if there is another good solution.
Best Regards,
Kuramochi
Part Number: TPS54295 Hi,
I’d like to seek your advice on soft start function of TPS54295.
- customer of mine unintentionally leave the Soft start pin unconnected (floating), we would like to know if the device can still be possibly power up (i.e…
Part Number: TPS54295 Hi,
I have used TPS5429 in the new design. I need help in keeping the device always in PWM mode.
Below is the design implementation:
Vin 10 - 12V
VOUT1 : 5V / 15mA
VOUT2 : 2.5V/ 0.5A
I have selected inductors as per…
Part Number: TPS54295 Hi all Would you mind if we ask TPS54295? Our customer would like to use TPS54295 with Cff=1000pF in order to prevent coil vaibration. (It depends on load, inductance and the board layout.) There is the difference between recomendation…
