Part Number: TPS543820 Hi Team,
We are using the TPS543820RPY Switcher part in our Layout Board file. I had attached the images of the Board file and Schematics. Please review the layout and share your feedback with us.
The PCB we are using is of…
Part Number: TPS543820 Hi Team,
We are using the TPS543820RPYR Switcher part in our schematics. I had attached the schematic Image below, Kindly review the schematics and share your valuable feedback with us.
Thanks and Regards
- Teja
Part Number: TPS543820 Hello,
I've heard that the Telcordia standards require a distance between pins to be 0.127 mm or wider. I guess the "distance between pins" here means the closest edges of the neighboring pins. Here I'd like to ask whether TPS543820…
Part Number: TPS543820 Hello team,
we are using the TPS543820 in a RF application.
Please, the device can be synchronized with an external Spread spectrum frequency clock?
If yes, which are the key parameters to keep in mind?
Any suggestion about…
Part Number: TPS543820 Hi team,
Could you let me know the intermediate Rmode resisotr is used which is shown in table7-4?
For example, what can happen if the 220kOhm resistor (between 174k and 243k) or 330k (between 243k and 412k) is used?
I'm interested…
Part Number: TPS543820 Hi,
I am working in the Webench design for this part number: TPS543820.
The simulation tab is not enabled for this chip. Do you know when would this be available?
Cheers
Part Number: TPS543820EVM Other Parts Discussed in Thread: TPS543820 Q1:On the evaluation board U2 of tps543820, the output capacitance is 2 22uF and 1 47uF, the slope compensation is 4pf, and the load change is 0-5A. Why is there a step on the output…
Part Number: TPS543820 I created a power supply that generates a 3.3V voltage from 12V to drive some LEDs. These need a larger current under full load. The power supply should be able to deliver a maximum current of 4A at 3.3V. With the Webench Designer…
