Part Number: TPS544B25 Dear Team,
There are two TPS544B25 on the OCM board. Due to the reduction in current demand, the over-current points of my two materials also need to be updated. Please help me check if there is any problem with the code file…
Part Number: TPS544B25 Tool/software: Hello, At TPS544B25, after Vin >= UVLO, how much time does a host have to wait before accessing I2C interface? Best regards, K.Hirano
Part Number: TPS544B25 Dear Team,
Today, the programming factory reported that the attached file TPS544B25 0.0 Address 46 Text.csv you provided, after using the original TI fixture such as the original programmer USB Interface Adapter, an error message…
Part Number: TPS544B25 Other Parts Discussed in Thread: TPS546B24A , , TPS546C23 , TPS543B20 Dear Team,
I would like to ask, the initial chip is applied by pulling down VSET, whether the default values inside the chip, such as undervoltage and overvoltage…
Part Number: TPS544B25 Hi,
I'm working on a design that contains one TPS65086100 and one TPS544B25.
I'd like to know if it's possible to connect both devices on the same I2C bus with the pull-up connected to the LDO3P3 power supply from the TPS65086100…
Jimmy Lai
TI's Fusion software uses .tifsp system files, .xml single device files, .csv programmer script files, and .txt text files, it does not support a hex file.
The formatting of a hex or binary file would be specific for the i2c/smbus byte…
Part Number: TPS544B25 WE have been using the TPS544B25 for various out put voltages from 0.8/1.1/1.2/1.5/1.8/2.5/3.3/5.0V all with Rt=20.1K which is 1Mhz switching Freq. The tisp file to program the device was provided by the FAE. The same tisp file…
Part Number: TPS544B25 Hi Team,
We are using TPS544B25 to generate the core rail of FPGA.
Can you please review the excel sheet for below Rail-
VIN-12V
VOUT - 0.78
Iout - 15A
Ripple - 18mV(Peak to peak)
Undershoot - 100mV
Please review…