Part Number: TPS54560B-Q1 Tool/software: Hi,
I used TI Power Designer to design a 12V, 4A buck converter using the TPS54560B-Q1. I've built multiple PCBs based on this design. However, when a load is connected, the output voltage drops from 12V to around…
Part Number: TPS54560B-Q1 Other Parts Discussed in Thread: TPS54560B Tool/software: Hi,
TPS54560B-Q1's datasheet, page 1 and page 4 both show "–40°C to 150°C TJ Operating Range"
while page 40 show it Op Temp (°C) is –40°C to 125°C
Please help…
Part Number: TPS54560B-Q1 Hello,
I am using the two Buck -TI part TPS54560BQDDARQ1 for the DC-DC converter. One for the output 12VDC /5A and second is for 5VDC/5A.
My input is 9V-32VDC.
I have attached my schematic is below. when I am checking the…
Part Number: TPS54560B-Q1 Tool/software: Dear TI-support team,
is it possible to connect two or more TPS54560B-Q1 ICs in parallel in order to get more output current?
The output is current-mode controlled and the COMP pin is available so two COMP…
Part Number: TPS54560B-Q1 Other Parts Discussed in Thread: TPS54560-Q1 Hi,
On the website, TPS54560B-Q1:is automotive part. but there is no "AECQ100" in the datasheet.
Is TPS54560B-Q1 AECQ100 part?
Thanks and best regards,
Hi Nityanand,
I was trying to best improve the design. The big problem at the moment is the noise at low voltages and light load.
Nityanand Hegde said: For reducing the AC line frequency component try connecting the board GND to earth GND.
The final…
Part Number: TPS54560B-Q1 Other Parts Discussed in Thread: TPS54560B Hi Sir,
if any reference design based on this IC(TPS54560B) which can pass E Mark? or have other suggest part number that pass e-mark certification, thnaks.
Part Number: TPS54560B-Q1 Other Parts Discussed in Thread: TPS62933 We made our custom power distribution board for a micro drone.
The board is supposed to supply:
20A at 17.4V to a 4in1 ESC (powering 4 BLDC motors) max - Battery
5V to flight…
