Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
For TPS54625, please check https://www.ti.com/lit/ds/symlink/tps54625.pdf#page=8 section 11.6 on current protection which will kick in when the output is shorted.
Thanks,
Amod
Part Number: TPS54625 Hi team
this is my customer SCH could you help me to review it ?
because I will LOA next week
can you reply this week?
there are
one TPS54625 in page1
one TPS54625 in page2
one TPS54625 in page3
total 3
in attached files
…
Part Number: TPS54625 I want to put current through a TEC module, I have TPS54625PWP set a 5.5V, and I will have a 8Vdc flow current through the TEC toward its 5.5Vdc output. Will TPS54625PWP function sinking current?
thanks
Part Number: TPS54625 Other Parts Discussed in Thread: TPS54325 , , TPS54525 , TPS54425 Hi Team,
Just want to double check, is TPS54325, TPS54425, TPS54525 and TPS54625 function equivalent and pin-compatible?
Customer is now using TPS54325 and TPS54425, but…
Part Number: TPS54625 What is the resistor range of R2 in TPS54625?
The datasheet contains recommended resistor values 22.1 kohm, but not ranges.
For example, TPS743xx has a written resistor range for R2, so I can choose the resistor value.
R2 <= 4…
Part Number: TPS566235 Other Parts Discussed in Thread: TPS54625 , Hi team,
I have a question on THERMAL METRIC in datasheet.
In the data-sheet, RθJA is 70C/W for TPS566235, and that is 40.5C/W for TPS54625.
I think the definition of RθJA strongly depends…
Part Number: TPS54625 Hi
I have a question about TPS54625.
Current limit threshold is written 7.2A(min), 8.2A(typ) and 9.5A(max) at L=1.5uH in ELECTRICAL CHARACTERISTICS.
If I change the inductor value, how does it's acuuracy change?
Or are there…
Part Number: TPS54625 Hi
Because the MOSFET are in the converter, the spec only show the SW(low side MOSFET) max voltage=20V.
We want to know the high side MOSFET max voltage=?
Thank you!
Part Number: TPS54625 Hello-
We have a problem where the TPS54625 occasionally won't start up in our existing circuit. We have a faster dV/dT on the input than previous designs, and we suspect the problem may involve too much output capacitance.
…
Part Number: TPS54625 Hi,
My customer is doing power interrupt test, but the output voltage latched-off for some reason. I think this issue is similar to what discussed on the other thread. The input voltage is 12V and the output voltage is 5V.
https…
