Part Number: TPS54672 Other Parts Discussed in Thread: TPSM846C23 I would like to use TPS54672 to sink continuously changing current at a certain voltage so that it can act as active load. I wanted to test before I go further and design the circuit. I…
Part Number: TPS54672 Hi, Good day. Our customer is using the TPS54672PWPR and they need the Theta JC of this device for thermal analysis. We would appreciate if you could help us provide this information. Thank you for your support
Regards, Cedric…
Part Number: TPS54672 I'm dealing with an existing design that utilizes multiple TPS545672. A small percentage of hardware exhibits what to be latch up characteristics after a input power drop out for a few hundred milliseconds. During this Dropout the…
Hello Midhun,
Since the TPS7H2140-SEP is a new deice, we are in the process of creating and publishing the model.
As a temporary measure, a model can be downloaded for a different product that uses the same PWP 28 package.
Another device that uses…
Russell Wetherley1
No, we can not disable the soft-start of the TPS549A20.
I can't think of any regulator whose soft-start is designed to start-up that fast, and I am not sure that many regulators would track the reference voltage rising that…
Other Parts Discussed in Thread: TPS54672 Hello,
Are there any DCDC converter which can be used the following requirement ?
Input Voltage : 5V or 8V or 12V
Output voltage : 0.1V~0.2V
Output current : +/- 4A(source/sink)
Our customer need 0…
The TL5001 internal reference is applied directly to the non inverting error amplifier input. If you wanted to use an external reference, you would need to implement an external error amplifier. i would probably then set up the internal amplifier as a…
Hi Chandru,
We have TPS51100, TPS51200 and new TPS51206 for VTT application. TPS51206 will be released soon. TPS51206 has similar performance with TPS51200 and TPS51100. But it reduced board area and BOM cost. 1. only 1x10uF VTT output capacitor is…
