The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
Part Number: TPS546C20AEVM1-746 Other Parts Discussed in Thread: USB-TO-GPIO2 , TPS546C20A We are testing the power of the TPS546C20AEVM1-746 without Fusion Digital Power Designer and TI USB adapter.
I checked the output voltage of 0.9V and 0.95V, but…
Part Number: TPS546C20AEVM1-746 Other Parts Discussed in Thread: TPS546C20A Dear Sir,
Why can't we find the device tps546c20a in the fusion fusion digital power studio? I use the latest version(Version 3.0.51 [2020-06-23]) of fusion. There is…
Hi Tahar,
The bode plot you mentioned about is issue #1 which is related measurement setup, particularly the length of probes and wires for the injection and scope.
Evaluation Board TPS546C20AEVM1-746
(no wire, direct probe)
Prototype
(short individual…
Part Number: TPS546C20AEVM1-746 Other Parts Discussed in Thread: TPS546C20A Hi,
We are going to purchase "TPS546C20AEVM1-746". Before purchasing the "TPS546C20AEVM1-746" we would like to confirm two things about the function.
Our test…
Part Number: TPS546C20A We have a design which has SM/PMBus pulled-up later than the power sequence of TPS546C20A through CNTL pin.
This results in “oth” flagged in STATUS_CML (7Eh) register, subsequently pulling-down SMB_ALRT.
By sending…
Part Number: TPS546C20A [Test environment] 1. We purchased "TPS546C20AEVM1-746" to use "PS546C20A".
2. We have successfully tested VOUT from 0.35V to 1.6V in the following environment. "TPS546C20AEVM1-746" - (USB-TO-GPIO) - "PC (FUSION_DIGITAL_POWER_DESIGNER…
Part Number: TPS546C20A
Hi,
We have purchased "TPS546C20AEVM1-746" and are learning about "TPS546C20A". ( Vout : 0.35~1.60V / 35A)
Since we are using PMBus for the first time, we do not know much about it.
Can we get technical documentation…
