Part Number: TPS546D24A
Hi, We are using a TPS546D24A device based on Tables 7-8. MSEL1 Divider Code for Programming. The switching frequency is set at 325KHz using code 3 (Resistor value 42.2K ), but when we measured it was 550KHz.
We have simulated in…
Part Number: TPS546D24A Hi,
Please verify the attached layout for TPS546D24ARVFR, Vin - 12v, Vout - 0.85V. Schematics and design calculator is also attached for reference.
Thanks
/cfs-file/__key/communityserver-discussions-components-files/196/TPS546D24ARVFR_5F00_1…
Part Number: TPS546D24A Other Parts Discussed in Thread: TPS546B24A , , TPS546A24A TPS546D24A_TPS546B24A_TPS546A24A_ExcelCalculator_SchematicLayoutChecklist_PRID2.xlsx
Hi Team,
I am using TPS546D24ARVFR in my design in a single stack configuration the…
Part Number: TPS546D24A Hello,
Does TPS546D24A require a power-on sequence for PVIN, AVIN, VDD5, and EN pins? In my case, +3.3 V is supplied to the PVIN and the AVIN pins together, and +5 V is separately applied to the VDD5 pin. This supply connection…
Part Number: TPS546D24A Hi we want to use BMC to dynamically change the VR output to 1.8V , but the voltage output became 1.4V by reading the meter.
The command as below:
Pls kindly help to check the command as below,
i2cset -y 2 0x1c 0x24 0x0466 w ;…
Shinichi Yokota
Shinichi Yokota said: I found the description in the section 7.3.12 Frequency Synchronization on page 30 of the data sheet that says the switching frequency will be around 50% of the nominal in a stand-alone device. Is it correct?
"When…