Part Number: TPS548B27 Tool/software: Hello,
Brand new to Simplis. I have the eval version. I am trying to simulate the TPS548B27 startup and average model simulations.
When I load the TPS548B27 transient model and run it I get the following error…
Part Number: TPS548B27 Tool/software: Hello,
I am not sure I am in the right forum, but here goes.
I am using the TPS548b27 to provide 10 A at 1 V to and FPGA core.
I need to run a transient simulation to confirm performance.
I used WEBENCH to…
Part Number: TPS548B27 Other Parts Discussed in Thread: TPS546E25 Tool/software: dear team,
we have include the part TPS548B27 in our, as our load is 40A can we add this part twice by combining the vout to achieve 40A load
do we have to add any…
Part Number: TPS548B27 Tool/software: Hello,
I am using the TPS548b27 to provide 10 A at 1 V to and FPGA core.
I need to run a transient simulation to confirm performance.
I used WEBENCH to get an initial design.
The table below is from the TPS548B27…
Other Parts Discussed in Thread: TPS548B27 Tool/software: I am trying to understand the difference between DCAP control and CM COT control. I just want to understand enough to model it and determine the gain and phase margin so I can be sure the DCAP…
Part Number: TPS548B27 Recently I performed a power supply stability test on our 1.03V power supply below. It showed a poor phase margin (<33 degrees) for this design.
I tried to simulate this design using TI Webench (attached design file) and ran…
Part Number: TPS548B27 Hi BU expert,
I have noticed the max Recommended Operating junction temperature is 125°C，But the max Operating junction temperature is 150 °C. So if the junction temperature is 125°C to 150°C, Will this have any adverse consequences…
Part Number: TPS548B27 When I create a design using Webench and try the Altium export option, the export fails and reports first "export in progress" and then "export failed". This seems to occur for any part and any of the other export options as well…
Part Number: TPS548B27 Other Parts Discussed in Thread: TPS54J061 , TPS548A28 I am trying to reduce the output voltage ripple on our TPS548B27 design.
According to the datasheet, with V IN = 4.5 – 5.5V, I OUT = 2.5A, V OUT = 1.03V, and f SW = 800 kHz…
Part Number: TPS548B27 Other Parts Discussed in Thread: TPS53355 , TPS548B28 , LM27402 Hi,
I am looking for a Buck Regulator with below requirement also which can support transient of 25A to 30A
Vin=3.3V, Vout= 0.8V, Iout=20A to 25A
Can you please…
