Part Number: TPS54910 Other Parts Discussed in Thread: BQ25180 , PTH04T241W
Hello,
We are using the TPS54910 to drive a heating element requiring a supply voltage of 2.4V and consumes up to 8A.
The TPS54910 is supplied directly from a a high discharge…
Part Number: TPS54910 Hi, team,
My customer met one issue about TPS54910 PG signal.
In customer's design, PG is pulled up to BIAS with 4.7k resistor. They found when TPS54910 is shutdown, PG voltage will be like below.
We tested some waveform…
The TPS54910 PWRGD function is controlled by two signals; the undervoltage comparator and _shutdown. Shutdown is asserted by UVLO, thermal protection, VBIAS out of toleranceand bandgap voltage out of tolerance. Current is not considered.
Other Parts Discussed in Thread: TPS54613 , TPS54910 , TPS54616 , TPS54610 hello, I am forwarding an inquiry from our customer:
>>>>> got some real issues with 2 parts. TPS54613 TPS54910 We find oscillations on PGood open drain output from the TPS54613…
The TPS54917 is a repackaged version of the TPS54910. The TPS54610 is a 6 A version of the TPS54910 (hint: TPS54xyz, x = output current). These are all voltage mode control buck converters. The design methodology is identical (although I should also point…
Other Parts Discussed in Thread: TPS54810 , TPS54610 , TPS54910 , TINA-TI TPS54610 and TPS54910 are in SwitcherPro. TPS54810 of the same familiy isn't in SwitcherPro. Will this part added? When?
Andreas
Part Number: TPS54610 Hello- mpc8270_1V5_0955_W3116_final.pdf
We are updating an old design with a newer processor, and need to lower the core voltage from 2.0 to 1.5V. We use the TPS54610 and would like to minimize board changes. The original design…
