Part Number: TPS54A24 Tool/software: We are using part TPS54A24RTWR to generate core voltage in my design to Eth Switch IC, I try to run Webench and the results strangers
The core voltage should be very accurate ( Typical =0.8V , MIN=0.77V, MAX=0.83V)…
Part Number: TPS54A24 Other Parts Discussed in Thread: TPS566231 , TPS566242 , TPS568231 , TPS566247 , , TPS56C231
Dear Team,
Looking forward to your answer of my questions.
And we have run some simulation on TI’s WEBENCH and found some of them not able…
Part Number: TPS54A24 I'm currently encountered with issue which couldn't configure transient pulse current setting in Webench. Setting would like to configure as below:
Initial Load Current: 6.3A Minimum Load Current: 0.7A Initial Time Delay (s…
Part Number: TPS54A24 Hello Sir/Mam
We are using part TPS54A24RTWR to generate multiple voltages in our Design , But as we don't have it's average model we cannot run frequency response to check stability of system.
So, Please review the schematics…
Part Number: TPS54A24 Other Parts Discussed in Thread: LM3880 I'm currently building an SPICE simulation of parts that use the LM3880 and the TPS54A24. The version of SPICE I'm using is not pSPICE unfortunately. Might there be an unencrypted model for…
Part Number: TPS54A24 I am going to use TPS54A24 for Xilinx K7 FPGA design. There is a design example provide in the datesheet of TPS54A24., which has 10A output current, 1.8V output valtage, and 500KHz switching frequency (shown in Figure 36, on Page…
Part Number: TPS54A24TPS54A24 is used in our project. In order to ensure the reliability of the design, we want to do a thermal simulation for it. According to the requirements of thermal simulation, we hope to get some internal parameters of the chip…
Part Number: TPS54A24 Hi,
When the following Iout does not flow, the IC operates with input voltage = output voltage.
・ VIN = 12V, VOUT = 12V, Iout = not use
I think the above is feasible because "100% Duty ON" is possible, but if you have any concerns…
