Part Number: TPS54020 Other Parts Discussed in Thread: TPS54A24 , TPS54824 , TPS54J060 , TPS543620 Hi Team,
I received a question from the customer asking about the RoHS status of TPS54020, I checked on e2e and found this post
https://e2e.ti.com/support…
Part Number: WEBENCH-POWER-DESIGNER Other Parts Discussed in Thread: TPS54A24 Hi expert,
My customer tried to simulate TPS54A24 with WEBENCH.
Recently, they cannot use SIMULATE function. they could use it until several days ago.
They pushed start…
Part Number: TPS543B20 Other Parts Discussed in Thread: TPS54A24 Hi,
I'm using TPS543B20 for an aplication. I have two questions:
1- In the "Layout Guidelines" section of the datasheet, it is mentioned about a "VOSNS" pin but there is no such pin…
Hi Yadong,
The spec in the datasheet is just one point on an voltage vs current curve for the power good pull-down FET. Luckily we have Vin vs Ipgood curve for this FET in the TPS54A24 datasheet. The power good pin design is identical in the TPS54824…
I do not think the TPS56121 will work for an LED application in which you want to PWM the EN/SS. The calibration time on the EN/SS is needed to have current limit. If there is no soft start capacitor on the EN/SS pin to get the fastest slew rate, the…
For lower current, the TPS54824 is the tightest reference I know of at 0.85%. Also look at the TPS54424 and TPS54A24 for similar parts with different current ratings (4A and 10A).
Hi Ajayt,
This device is RoHS Exempt. What is shown in the ordering and quality portion on ti.com and the device contents summary is correct.
I'm also confused by how it is listed in the Eco Plan on the POA page of the datasheet. I've checked a few…
Hi Carl,
TI offers a wide variety of products especially power that go into developing 5G systems. Here is a technical article that talks about power being used in them.
http://www.ti.com/lit/wp/slyy166/slyy166.pdf
Because thermal is an important…
Hi Efi,
You mentioned LMZ31710 -- are you looking for power modules (integrated inductor) specifically?
For many of these rails (8V, 6.25V, and 5.7V outputs), please take a look at the TPSM84824 (8A) and TPSM84424 (4A) modules. You could synch those…
