Part Number: TPS55288EVM-045 Other Parts Discussed in Thread: TPS55288EVM-053 Hello,
if possible could You send me design files in Altium or Eagle or Allego format?
For TPS55288EVM-045 and TPS55288EVM-053.
Best Regards,
Jake.
Part Number: TPS55288EVM-045 Other Parts Discussed in Thread: TPS55288 I was successfully testing the evaluation board at 14V in, 10.8V output, at 3 amps, when it suddenly switched off. I removed the board from the test environment, and attached to a bench…
Part Number: TPS55288EVM-045 Other Parts Discussed in Thread: TPS552882 , TPS55288 Dear TI technical support
Presently i try a TPS55288-EVM045 board. This buck/boost works very well for my application. But i need the GUI interface to configure each time…
Part Number: TPS55288EVM-045 Hi Team,
I have a question about TPS55288EVM board. The Vout will keep enable status when I change the value 0x03 to 0x00 at Reg[0x04h].
But when I TPS55288EVM_issue_E2E.xlsx , Vout will disable. The test information as attached…
Part Number: TPS55288EVM-045 Other Parts Discussed in Thread: TPS55288 , , TPS552882 Hello Team,
I am designing a USB PD Type A and Type C Wall charger and have shortlisted on TPS55288 for the DC/DC buck boost. below is my requirement -
Vin - 2.7 - 24V
…
Part Number: TPS55288EVM-045 Hi Team,
I have two questions about using TPS55288EVM-045.
1. When I removed 220uF Cout and I used GUI to set Vout = 6V or above, I could hear noisy on the board. (no load) Do you have idea why this noise occur?
2. Do we…
Part Number: TPS55288EVM-045 Other Parts Discussed in Thread: USB2ANY , TPS55288 , , TPS55288-EVM-GUI I have a new TPS55288 EVM board, and a new USB2ANY. I have the program up to work with the TPS55288, and the GUI Composer has been loaded. However the…
Part Number: TPS55288 Hello,
I have a question about the TPS55288 IC.
I have designed and made a schematic and PCB with the exact same components as the TPS55288EVM-045 Evaluation Board, and placed them on a much smaller PCB (about 25mm x 30mm) and I…