Part Number: TPS563202 Other Parts Discussed in Thread: TPS562202 , I have a design where the TPS563202 (and possible alternate TPS562202) is configured to output 5V, and I want it to work with an input voltage range of about 4.5V to 16V. I would like to know…
Part Number: TPS563202 Hi Team,
My customer need to asses abnormal conditions when they use new device.
Do you have Pin FMEA document of TPS563202?
It will pretty helpful to fill their abnormal condition list spread sheet.
Regards,
Takashi Onawa
Part Number: TPS563202S Other Parts Discussed in Thread: TPS563202 , Hi,
I have selected TPS563202SDRLR as buck converter for my application (i.e., Vin = 4.8 to 9V , Vout = 3.3 V , Iout = 0.5A maximum).
This IC thermal resistance is 137 deg C/W .
Tj = TA…
Part Number: TPS563202S Other Parts Discussed in Thread: TPS563202 , TPS563201 Hi,
I'm using the TPS563202 in a new design, and it is set to supply 5V on the output. Normally, the part is powered by a permanently-wired 12V wall wart adapter. During…
Part Number: TPS563202 Hi team,
Is Vref accuracy the only difference between TPS563202 and TPS563202S? But there is no difference in the characteristic graphs of both FB and Tj.
For example, how can I estimate the accuracy of 85 degrees?
Best Regards, …
Part Number: TPS563202S Other Parts Discussed in Thread: TPS563231 , Hi,
Can you confirm that the TPS563202S and TPS563231 are identical? Can I use the values generated for the 563231 in Webench for the 563202S?
Thanks
Connor
Part Number: TPS563202 Hi team,
I see that the control mode of TPS563202 is D-CAP2, but according to 7.3.1 Adaptive On-Time Control and PWM Operation, this control mode is like COT mode.
I think the D-CAP2 mode should be as follows.
Another question…
Part Number: TPS563203 Other Parts Discussed in Thread: TPS563202 Hi team,
Could you help check if TPS563202 could output -5V/1.5A under 5V input?
Thanks and Best Regards,
Will
Part Number: TPS563202 Hi Team,
One quick question.
Is it OK to connect EN pin to VIN directly? In the figure 15, they are connected through 10k pull up resister so let me confirm that just in case.
Regards,
Takashi Onawa
Part Number: TPS563203 Other Parts Discussed in Thread: TPS563202 Hello Team,
Our customer using TPS563202 right now, but for next roadmap, TPS563203 looks can be replaced in future.
But, I have several questions as below, could you answer for me?
…