Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.



Search tips
Showing 30 results View by: Thread Post Sort by
    Answered

  • TPS563202: Less efficient than datasheets

    Resolved
    Part Number: TPS563202 Tool/software: Hi team, I have measured the efficiency using a regulated power supply with the attached schematic, but it is only about 80%. Is there any possible cause for this? C511 GRM21BR61E226ME44K Murata C512 GRM155…
    • Resolved

  • TPS563202: Request review a schematic of TPS563202.

    TI Thinks Resolved
    Part Number: TPS563202 Hi The schematic was performed by applying TPS563202? I want to get a review, but I can't disclose the content. Can you tell me how to send it personally? Thanks

  • TPS563202: Is it possible to design input 12V output 5V3A?

    TI Thinks Resolved
    Part Number: TPS563202 Hi Is it possible to design input 12 V output 5V3A? In the data sheet, it appears to be possible in multiple charts, but with web entries, it is impossible to design due to the temperature difference as shown below. Please check…

  • TPS563202: Circuit and lay-out review request

    TI Thinks Resolved
    Part Number: TPS563202 Dear, TI support team I have received request for circuit and lay-out review from customer. Because the material is confidential, I can't upload it on this thread. Please let me know your email. I will send the material. Thanks…

  • TPS563202: schematic review

    TI Thinks Resolved
    Part Number: TPS563202 Hi expert could you please help review this schematic, because we don't have suitable 1.2uH or 1.5uH inductor, we used 2.2uH. Input is 12V， output is 0.8V~1V，2.4A

  • RE: TPS563202: Inquiry for FB voltage

    Hi MJ, Due to operation logic of DCAP2, VFB would be higher than Vref with 0.5*Vout ripple. In Eco-mode DCM operation, Vout ripple is quite large and depends on LC value, which varies with customer BOM. So we could not give its min/max value. BRs Zix…

  • TPS563202: Test reports for TPS563202

    TI Thinks Resolved
    Part Number: TPS563202 Hi team, I am using TPS563202 for 5V 2A power supply in my design. I am not able to find the simulation file (Spice model) for this TPS563202. It will be very helpful, if you provide the simulation file or spice model for TPS563202…

  • TPS563202: Request for circuit and lay-out review

    TI Thinks Resolved
    Part Number: TPS563202 Hi, TI support team I have received request for circuit review from customer. This is a request for review related to the circuit diagram and layout of the parts below. TPS563202DRLR, TPS563252DRLR, TPS563207DRLR Since it is a confidential…
    • Answered

  • TPS563202: Current limit

    Resolved
    Part Number: TPS563202 Hi Team, My customer is using the device in the following environment as a test. Vin：11.4V 、 12.0V 、 12.6V Vout：5.0V Iout：0A~Over current condition ( with electronic load） Temp：80 ℃ They reported current limit was observed at around…
    • Resolved

  • TPS563202: Maximum Allowed Output Capacitance of TPS563202?

    TI Thinks Resolved
    Part Number: TPS563202 Hello I want to use as much capacitance as possible with the TPS563202. What is the maximum capacitance allowed? Thanks

Didn't find what you are looking for? Post a new question.