Part Number: TPS563201 Hi Experts,
TPS563201 over-current limit (OCL) is implemented using a cycle-by-cycle valley detect control circuit. But I find, when the valley current exceeds the threshold, there is no immediate protection, but action after a few…
Part Number: TPS564201 Tool/software: TI C/C++ Compiler hi,
Since we have plan to do a power unit with the help of TPS564201,we need TYP volage -5V and what is the input is Requires and if you people have any waveform please share and guide us...
Thanks…
Part Number: LMR51430 Other Parts Discussed in Thread: TPS564201 , LMR51635 Tool/software: Warning: I'm an amateur, working on a home project. My problem seems closely related to this old thread: https://e2e.ti.com/support/power-management-group/power…
Part Number: TPS564201 Other Parts Discussed in Thread: TPS568230 Hi,
I wonder what is the output discharge parameter for this part, since it's appear on the datasheet table but there are no value in the table.
Please see below capture:
Please…
Part Number: TPS564201 Other Parts Discussed in Thread: TPS565201 , , TPS561201 Dear all.
The layout of TPS565201 is different from TPS561201 to TPS564201. Which layout is best? 8737.layout.pdf
Regards, PAN-M
Part Number: TPS564201 Hello,
we have trouble with the TPS564201 and the UCC3813D-2 in EMC immunity tests for the standart EN61000-4-3. We use the TPS564201 to generate our logic voltage of 3.3V from 12V input. There are 3 PCBs using this converter. Some…
Part Number: TPS564201 Other Parts Discussed in Thread: TPS54340 , LMR23630 Hello TI,
considering the TPS564201 has a limited input voltage range, would you have any recommendations as to what kinds of protection should be implemented to withstand the…
Part Number: TPS564201 Other Parts Discussed in Thread: TINA-TI , , DRV2605L , DRV8601 , LP2981 Tool/software: TINA-TI or Spice Models I cannot find the following components in Tina-TI,
TPS564201
DRV2605l
DRV8601
LP2981-33
I even cannot find their spice…
Part Number: TPS564201 I am using Tps564201 for a driving a load that requires 1.3V - 1.5 Amp, i have designed the output filter according to TI webench design and the datasheet of the IC.
But there is a ripple of 600mV in the output. and output voltage…