Part Number: TPS566235 Hi,
I use the TPS566235 regulator in my design and the problem is that the regulator is not short-circuit immune. When the short circuit occurs, the regulator is permanently damaged. Do you have any experience with similar problem…
Part Number: TPS566235 Other Parts Discussed in Thread: TPS54531 , TPS56637
Hi Team,
Our customer wants to evaluate the TPS566235 to output variable voltage up to 7V or over, but they want to know what's the behavior if the voltage setting is over…
Part Number: TPS566235 Hi Experts,
Our customer is using TPS566235 on their board and are facing some EMI issues. We are trying to add a series resistor with BST cap which can have some improvements. Now we are using a 3.3ohm resistor for R1 in below…
Part Number: TPS566235 Other Parts Discussed in Thread: TPS54331 , , TINA-TI Hi
I would like to compare the transient behavior of the TPS566235 with TPS54331 in Tina TI but I only found a PSpice model for TPS566235.
Is it possible to provide me a…
Part Number: TPS566235 Other Parts Discussed in Thread: TPS566335
Hi sir,
Now I use TI device of TPS566335. If this IC is used for VIN: 12V and Vout: 1V, is it possible to add ceramic capacitor 470pf between Vout-FB like the attached schematic to…
Part Number: TPS566235 Hi,
I measure the VIN shutdown current of TPS566235 with 12V Vin and 0V VEN.
The result is 89uA, which is different from the value 3uA in datasheet.
Can you help to check with this value?
Thanks.
Part Number: TPS566235 Other Parts Discussed in Thread: TPS563211 , , TPS568230 Hi team,
It seems that TPS566235 doesn't have the output discharge function, but can the Power good-pin be used for output discharge like TPS563211? The section of "7.3…
Part Number: TPS566235EVM Other Parts Discussed in Thread: TPS544C20 , TPS566235 Hi Team,
Our customer is asking for TPS566235 and TPS544C20 EVM design source file for PCB layout reference, can you help to check if we can share them?
Thanks a lot…
Part Number: TPS566235
I am currently planning to use the TPS566235 to configure a 12V to 3.3V DC / DC converter. Therefore, the resistance value that sets the FB voltage Data sheet recommendation value
RUPPER: 90KΩ RLOWER: 20KΩ
Then it will be…
Part Number: TPS566235 Hello
I have some questions about TPS566235.
1. Could you tell me the purpose of R2(49.9Ohm) in Figure 19? Is this absolutely required? How much tolerance is required for this 49.9ohm?
2. Is C10 in the same Figure 19 C_FF…
