Part Number: TPS57114C-Q1 Other Parts Discussed in Thread: TPS62810-Q1 , Hi team,
My customer compare datasheet between TPS57114C-Q1 and TPS62810-Q1.
In TPS62810-Q1 datasheet, it is described PWM Switching Frequency Tolerance.
Is there a similar specification…
Part Number: TPS57114C-Q1
My Application: Vout max is 1.81V (Adjustable) and Vin Max. 5.3V and Switching frequency is 2MHZ.
Question 1:
Currently using 100nf MLCC capacitor at Boot pin, Can I change 100nf 50V to 100nf 16V. Should I consider EMC here…
Part Number: TPS57114C-Q1 Other Parts Discussed in Thread: TPS57114EVM Hi There,
I have a question regarding the TPS57114C-Q1 design guideline in the datasheet.
On page 20, it says “use the lower value of Eq 16 or Eq17 as the maximum crossover frequency…
Part Number: TPS57114C-Q1 Hi,
We are using TPS57114C-Q1 as 1V8 regulator. Can we externally supply 2.5V at the output of this regulator when this regulator is off /ON condition?
will there be any impact ?
Thanks & Regards,
Rackshith PG
Part Number: TPS57114C-Q1 Hi,
There is no data available regarding switching frequency tolerance in the datasheet. So could you please share the switching frequency tolerance of the TPS57114C-Q.
In our application, We have connected external resistor…
Part Number: TPS57114C-Q1 Could you please provide the DRBFM (Design Review Based on Failure Mode)?
Device name: TPS57114QRTERDN & TPS57114CQRTERQ1
At first, I requested to CSC, but they not create the DRBFM document .
Part Number: TPS57114C-Q1 I see a project in my company to use TPS57114CQRTERQ1 design for 5Vin to 1.1Vout/2A and its Fsw setting is 1.8MHz. But I think if input is 5.5V, 1.1Vout will can't be regulation within +/- 5% of 1.1V since there is a minimum…
Part Number: TPS57114C-Q1 Hello Team,
Thanks for your support.
Our customer will control the switching frequency of TPS57114C-Q1 by using external clock.
In case the external clock have variation then it apply more than 2MHz to RT/CLK pin, What happen…